Multiquip 65908 Hydraulic Hose 1/2 x 765mm with 45-45 Degree

The Multiquip 65908 is a genuine OEM Hydraulic Hose 1/2 x 765mm with 45-45 Degree designed for the RW1810 RAMMAX ride-on roller. As a direct Multiquip OEM component, part 65908 is manufactured to the exact pressure ratings, hose diameter, and end-fitting angles required by the hydraulic system on RW1810 series equipment. Sourcing a genuine OEM hose means you get the correct 45-degree fitting orientation at both ends — critical for a leak-free, correctly routed installation. Verify fitment using your machine's model code before ordering to ensure a proper match.

Key Features

• OEM-Matched Pressure Rating: — Built to handle the specific hydraulic system pressures of the RW1810, so the hose performs without ballooning, cracking, or weeping under working load.
• Correct 45-45 Degree End Fittings: — Both ends are factory-terminated at 45-degree angles, matching the original routing path and allowing the hose to seat flush without stressing adjacent fittings.
• Exact 1/2" x 765mm Specification: — The precise inner diameter and cut length are matched to the OEM design, so the hose routes cleanly through the machine without slack or tension.
• Verified RW1810 Fitment: — Confirmed for the Multiquip RW1810 RAMMAX ride-on roller; always cross-reference your model code and serial number to confirm applicability.
• Hydraulic Integrity Where It Counts: — A correctly rated hose keeps hydraulic pressure stable throughout the roller's drive and compaction circuits; a degraded hose causes pressure loss, erratic machine response, and potential fluid contamination.
• Fuel and Fluid System Safety: — Hydraulic hose integrity directly affects operator safety on ride-on equipment; using an OEM-spec hose with correct end fittings reduces the risk of high-pressure fluid leaks in the operator environment.

A hydraulic hose carries pressurized fluid between the pump, control valves, and hydraulic motors or cylinders that drive and steer the roller. On ride-on compaction equipment like the RW1810, the hydraulic circuit is the backbone of both propulsion and vibration control — any loss of hose integrity translates directly into sluggish response, reduced compaction force, or a machine that cannot drive. When a hose fails, whether through abrasion, fitting separation, or internal degradation, it can cause sudden pressure loss or spray high-pressure fluid into the machine's working environment, creating both a performance and a safety hazard. Replacing a worn or damaged hose promptly with the correct OEM part keeps the hydraulic circuit sealed and operating at design pressure.

For questions about fitment or to confirm this is the right part for your machine, contact the DHS Equipment team directly.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.