The Multiquip 66515 is a genuine OEM Hydraulic Hose 3/8 x 960mm with 45 Degree designed for the RW1404MR walk-behind roller. As a factory-sourced component, this hose is manufactured to the exact pressure rating, diameter, and end-fitting specification required by the original hydraulic circuit. Correct fitment is confirmed for RW1404MR series equipment, making this the straightforward choice when replacing a worn or damaged hydraulic line.
Key Features
- OEM-Rated Pressure Construction — Built to the hydraulic system's operating pressure demands of the RW1404MR roller, ensuring the hose wall and reinforcement layer perform as the original design intended.
- Pre-Formed 45-Degree End Fitting — The 45-degree swaged fitting matches the original routing angle exactly, allowing the hose to seat flush against the hydraulic ports without bending or stressing adjacent lines.
- Correct 3/8" x 960mm Dimensions — Precise bore diameter and overall length match the factory routing path, eliminating the need to cut, crimp, or adapt a generic hose to fit.
- Fitment Verified for RW1404MR Rollers — Sourced directly from Multiquip as a genuine OEM part, this hose is catalogued specifically for the RW1404MR walk-behind roller series.
- Hydraulic Integrity Under Vibration — Roller hydraulic circuits experience continuous vibration during compaction passes; a properly rated hose maintains a leak-free seal where an underspec replacement will crack or weep over time.
- Fuel and Oil Resistant Outer Jacket — The hose exterior resists degradation from incidental contact with hydraulic fluid, oils, and typical jobsite contaminants that accelerate surface cracking.
A hydraulic hose carries pressurized fluid between the pump, control valves, and actuators that drive the drum and propel the roller. When a hose develops a leak or internal collapse, hydraulic pressure drops and the machine loses the power needed to drive the drum or maintain consistent compaction force. Left unaddressed, even a small weep can deplete the hydraulic reservoir quickly and cause pump cavitation or control valve damage. Replacing a failed hose with a correctly rated, properly dimensioned OEM part restores full system pressure and protects the downstream components that depend on it.
Part Details
| Part Number | 66515 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Hydraulic Hose 3/8 x 960mm with 45 Degree |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rollers | RW1404MR |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip
Multiquip 66155 Hydraulic Hose 3/8" x 310mm with 45 Degree
Multiquip
Multiquip 65983 Hydraulic Hose 3/8" x 1470mm with 45-90 Degree
Multiquip