The Multiquip 71477023610 is a genuine OEM Crankpin Bearing U.S. 0.25 designed for Multiquip rammers and plate compactors including the MT-76D2, MT-86D2, MVC98D2, MVH-150D, MVH-150D2, and MVH150VD2. As a factory-original component, it meets the same tolerancing and material standards as the bearing installed at the time of manufacture. Sourcing the correct crankpin bearing by part number 71477023610 is essential to restoring proper crankshaft function and protecting the surrounding engine components from accelerated wear.
Key Features
- Precision-Matched Bearing Tolerances — Ground to OEM specifications for the 0.25 undersize journal dimension, ensuring correct oil film clearance and load distribution at the crankpin.
- Genuine OEM Component — Sourced directly from Multiquip, this bearing carries the same part number and material spec as the original, with no substitutions or dimensional compromises.
- Broad Fitment Across Rammer and Plate Compactor Families — Compatible with MT-76D2 and MT-86D2 rammers as well as MVC98D2, MVH-150D, MVH-150D2, and MVH150VD2 plate compactors.
- Restores Crankshaft Integrity — Installing a correctly sized undersize bearing on a reground crankpin brings running clearances back within specification, extending engine service life after a crankshaft reconditioning.
- Drop-In Service Fitment — Designed to seat directly into the connecting rod big-end bore on compatible models, supporting a straightforward engine rebuild without custom machining of the bearing itself.
The crankpin bearing sits between the connecting rod's big-end bore and the crankshaft crankpin journal, allowing the rod to rotate smoothly around the crank as the piston strokes up and down. A thin pressurized oil film separates the bearing surface from the journal, and when that clearance is correct, friction and heat remain low. When this bearing wears, scores, or spins in its bore, the oil film breaks down — leading to metal-to-metal contact, rapid journal damage, and ultimately engine seizure. The U.S. 0.25 designation indicates this is an undersize bearing, intended for use after the crankpin journal has been reground 0.25 mm undersize to remove wear or scoring, restoring the correct running clearance with a fresh bearing surface.
Part Details
| Part Number | 71477023610 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Crankpin Bearing U.S. 0.25 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rammers | MT-76D2 |
| Rammers | MT-86D2 |
| Plate Compactors | MVC98D2 |
| Plate Compactors | MVH-150D |
| Plate Compactors | MVH-150D2 |
| Plate Compactors | MVH150VD2 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
