The Multiquip 87528ZE1810 is a genuine OEM Choke Mark designed for a wide range of Multiquip, Whiteman, Essick, and STOW equipment across multiple product families. As an authentic OEM component, it meets the same production standards as the original part installed at the factory, ensuring correct appearance and function on every unit it serves. This label is confirmed to fit plate compactors including MVC-64H, MVC-70H, MVC-88GH, and MVH-120GH models, concrete mixers such as MC-42S, MC-62S, EC-42S, WC-42S, and CMS-44S, pumps including QP-202TH, QP303H, CP-20H, and MQD2H, masonry and concrete saws, walk-behind trowels, and more — making it one of the most broadly applicable service labels in the Multiquip parts catalog.
Key Features
- Genuine OEM Labeling Material — Produced to Multiquip's original specifications, with legible, durable choke indicator graphics that hold up in dusty and outdoor work environments.
- Direct-Replacement Adhesive Label — Designed to mount in the original choke marking position without surface preparation beyond standard cleaning; no trimming or fitting required.
- Broad Cross-Equipment Fitment — Fits plate compactors (MVC and MVH series), concrete and mortar mixers, centrifugal and trash pumps, concrete and masonry saws, walk-behind trowels, and diaphragm pumps across the Multiquip, Whiteman, Essick, and STOW brands.
- Operator Clarity at the Point of Control — A correctly placed choke mark allows operators to identify choke position at a glance, supporting faster, correct cold starts and reducing the risk of engine flooding from misread controls.
- OSHA-Aligned Control Identification — Clear, legible control markings support compliance with equipment labeling requirements and help prevent operator error in shared or rental-fleet environments.
The choke mark is an adhesive identification label affixed near the choke control on gasoline-powered equipment. It indicates choke position — typically open or closed — so the operator can set the carburetor correctly for cold or warm starts. A missing, faded, or damaged choke mark can cause confusion during startup, leading to engine flooding, hard starting, or unnecessary wear. Replacing a worn label restores clear communication between the machine and its operator, keeping startup procedures fast and correct.
Part Details
| Part Number | 87528ZE1810 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Choke Mark |
Compatibility & Fitment
| Name | Model |
|---|---|
| Vibrators | G55H |
| Concrete Mixers | MC-42S |
| Mixers | MC-64S |
| Mixers | MC-64P |
| Saws | MP1H |
| Saws | MP115E |
| Saws | MP120E |
| Plate Compactors | MVC-64HW |
| Plate Compactors | MVC-70H |
| Plate Compactors | MVC-70HW |
| Plate Compactors | MVC-88GHW |
| Plate Compactors | MVH-120GH |
| Plate Compactors | MVH-R60H |
| Concrete Mixers | EC-42S |
| Concrete Mixers | EC-62S |
| MQ Mixers | MC44S |
| Concrete Mixers | MC-62S |
| Concrete Mixers | MC-62P |
| Concrete Mixers | CMS-44S |
| Concrete Mixers | CMS-4S |
| Concrete Mixers | CMS-64S |
| Concrete Mixers | CMS6S |
| Concrete Mixers | WC-42S |
| Portable Mixers | MS45E |
| Mixers | WM-70S |
| Mixers | WM-70P |
| Diaphragm Pumps | MQD2H |
| STOW Diaphragm Pumps | SDP-3 |
| STOW Centrifugal Pumps | CP-20H |
| MQ Centrifugal Pumps | QP-204H |
| Centrifugal Pumps | QP303H |
| Centrifugal Pumps | QP205SH |
| MQ Trash Pumps | QP-202TH |
| Trash Pumps | QP2TH |
| Concrete Saws | FCG1-6HA |
| Masonry Saws | MASONPROMP1 |
| Saws | MP1415E |
| Saws | MP1420E |
| Portable Mixers | MS1415E |
| International Walk-Behind Power Trowels | CA-4-4H |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| MQ Mixers | MC64P/S |
| Heavy Duty Series | HPHA36C5H |
| Power Trowels | CA4.4HM |
| C and CA Series | CA4HC |
| Saws | SCT36ANDSCT46 |
| STOW Diaphragm Pumps | CA90749 |
| Plate Compactors | MVH-R60W |
| Concrete Mixers | EC-62P |
| Concrete Mixers | WC-62S |
| Concrete Mixers | WC-62P |
| ESSICK Plaster-Mortar Mixers | EM-70S |
| ESSICK Plaster-Mortar Mixers | EM-70P |
| Portable Mixers | MS15H5.5 |
| Portable Mixers | MS15E |
| Portable Mixers | MS45H5.5 |
| Concrete Saws | FCG1 |
| Saws | MP1455H |
| STOW Masonry Saws | TRAK-14 |
| Portable Mixers | MS1455H |
| Portable Mixers | MS1420E |
| Concrete Saws | SFCG1 |
| Saws | MP1455HP |
| Mixers | WM70S/P |
| Saws | SCT36 |
| Saws | SCT46 |
| Plate Compactors | MVC-64H |
| Plate Compactors | MVC-88GH |
| Plate Compactors | MVC90H |
| Diaphragm Pumps | MQD2D3H |
| STOW Diaphragm Pumps | SDP-2 |
| STOW Centrifugal Pumps | CP-30H |
| STOW Trash Pumps | T-20H |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
