The Multiquip 88911MJ3000 Fender Grommet is a genuine OEM component designed for GA3.6HZ, GA3.6HA, GA6HB, GA6HEB, GA3.6HR, GAW180HEA, GAW180HE1, and GAW180HE series gasoline-powered generators and arc welders. As a direct Multiquip OEM part, 88911MJ3000 is manufactured to the same specification as the original, ensuring a proper seat and seal at the fender panel without rework or fitting. If your existing grommet is cracked, torn, or missing, replacing it promptly protects surrounding sheet metal and wiring from vibration-related wear. DHS Equipment stocks this part so you can get your generator or welder back in service without delay.
Key Features
- Genuine OEM Material Grade — Molded from the same rubber compound as the original, maintaining the correct flexibility and compression characteristics needed to seal and cushion at the fender panel.
- Drop-In Installation — Engineered to snap directly into the factory fender opening with no trimming or modification, matching the original hole diameter and retention lip geometry.
- Broad Generator and Welder Fitment — Confirmed for GA3.6HZ, GA3.6HA, GA6HB, GA6HEB, GA3.6HR, GAW180HEA, GAW180HE1, and GAW180HE equipment.
- Protects Wiring and Sheet Metal — A correctly seated grommet prevents cable chafing and corrosion at panel pass-throughs, keeping electrical integrity intact over the machine's service life.
- Electrical Safety at Panel Pass-Throughs — Grommets at wiring entry points are a critical barrier against insulation damage; a compromised grommet can create a short circuit or grounding fault on generator and welder frames.
A fender grommet is a rubber insert fitted into a hole in the machine's outer panel or fender, wherever a wire harness, cable, or hose passes through sheet metal. Its job is to cushion the edge of that hole so that vibration during operation does not wear through the insulation or material of whatever runs through it. On generators and arc welders, where electrical cables are routed close to the engine compartment, a deteriorated grommet can allow insulation to fray against bare metal, increasing the risk of shorts or grounding faults. Replacing a worn or missing grommet is a low-cost step that preserves both the structural integrity of the panel and the safety of the electrical system.
Part Details
| Part Number | 88911MJ3000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Fender Grommet |
Compatibility & Fitment
| Name | Model |
|---|---|
| Gasoline Powered Generators | GA3.6HZ |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA6HB |
| Gasoline Powered Generators | GA6HEB |
| Gasoline Powered Generators | GA3.6HR |
| Welders | GAW180HEA |
| Welders | GAW180HE1 |
| Welders | GAW180HE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
