The Multiquip 90004ZH7003 is a genuine OEM Flange Bolt 6x29 designed for a wide range of Multiquip and Whiteman equipment, including MVC, MVH, and MVB series plate compactors, MC and WC series concrete mixers, CA and JH series walk-behind power trowels, and MQ and QP series diaphragm and centrifugal pumps. As a direct Multiquip OEM part, 90004ZH7003 is manufactured to the exact thread pitch, shank diameter, and flange geometry specified for these machines. Stocking this fastener on hand keeps maintenance and repair work moving without delays waiting on hardware.
Key Features
- Genuine OEM Fastener Grade — Manufactured to Multiquip's specified tensile strength and thread tolerance for the 6x29 flange bolt application, so clamping load stays consistent under vibration.
- Integrated Flange Design — The built-in flange distributes clamping force across the mating surface without a separate washer, simplifying installation and maintaining joint integrity on high-vibration equipment.
- Broad Cross-Equipment Fitment — Confirmed for MVC80VH, MVC82VHW, MVC-88VGHW, MVC90H, MVH-120GH, MVH120VGH, MVH128GH, MVB150H, MVB85H, MVC64VH, MC-42S, WC-42S, EC-42S, CMS-44S, CA4HM, JH55C, QP-204H, QP2TH, MQ-D206H, and additional models.
- Vibration Resistance — Plate compactors and rammers subject fasteners to constant cyclical loading; using the correct OEM-spec bolt prevents loosening, thread stripping, and structural joint failure during operation.
- Exact Thread and Length Match — At 6mm diameter and 29mm length, this part fits the designed bolt holes without bottoming out or leaving insufficient thread engagement.
A flange bolt is a hex bolt with an integrated washer-style flange beneath the head that spreads clamping load over a wider surface area. On high-vibration equipment like plate compactors, power trowels, and pump assemblies, this design helps resist self-loosening that standard hex bolts are more susceptible to during prolonged use. When a flange bolt fails — whether through thread stripping, shear, or loosening — the joint it secures can shift or separate, leading to misalignment, component damage, or unsafe operating conditions. Replacing worn or damaged fasteners with the correct OEM specification bolt restores the joint to its designed clamping performance.
Have questions about fitment or need help confirming compatibility? Contact the DHS Equipment team for support.
Part Details
| Part Number | 90004ZH7003 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Flange Bolt 6x29 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Whiteman Walk-Behind Power Trowels | JH55C |
| Concrete Mixers | MC-42S |
| Plate Compactors | MVC80VH |
| Plate Compactors | MVC80VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC-88VGH |
| Plate Compactors | MVC-88VGHW |
| Plate Compactors | MVC90H |
| Plate Compactors | MVH-120GH |
| Plate Compactors | MVH120VGH |
| Plate Compactors | MVH128GH |
| Concrete Mixers | EC-42S |
| MQ Mixers | MC44S |
| Concrete Mixers | CMS-44S |
| Concrete Mixers | CMS-4S |
| Concrete Mixers | WC-42S |
| Single Directional Plate Compactors | MVB150H |
| Plate Compactors | MVB85H |
| Plate Compactors | MVC64VH |
| Plate Compactors | MVC64VHW |
| MQ Diaphragm Pumps | MQ-D206H |
| Diaphragm Pumps | MQD2H |
| Diaphragm Pumps | MQD2D3H |
| MQ Diaphragm Pumps | MQ-D305 |
| MQ Diaphragm Pumps | MQ-D306HA |
| STOW Diaphragm Pumps | SDP-2 |
| STOW Diaphragm Pumps | SDP-3 |
| Centrifugal Pumps | QP-204H |
| Centrifugal Pumps | QP303H |
| Centrifugal Pumps | QP205SH |
| Power Trowels | CA4.4HM |
| MQ Diaphragm Pumps | D306 |
| STOW Centrifugal Pumps | CP-20H |
| Centrifugal Pumps | QP2H |
| Centrifugal Pumps | QP2TH |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| International Walk-Behind Power Trowels | CA-4-4H |
| C and CA Series | CA4HC |
| STOW Diaphragm Pumps | CA90749 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
