The Multiquip 90006ZE2000 is a genuine OEM Tapping Screw 6X10 designed for a broad range of Multiquip and Whiteman equipment, including MVH208GH, MVH308GH, and MVH408GH plate compactors, MRH800GS and V305EH walk-behind rollers, MC12PH concrete mixers, WM120SH and WM120PH Whiteman mixers, EM120S and EM120P Series Essick mixers, SP118 and MP-series masonry saws, and SP1CE13H18 flat saws. As a genuine OEM part sourced directly from Multiquip, 90006ZE2000 matches the exact thread form, drive type, and material specification of the original hardware used on the production line. When a tapping screw works loose, strips, or corrodes, it can compromise panel retention and structural integrity across housings, guards, and covers — making prompt replacement with the correct OEM fastener essential.
Key Features
- Genuine OEM Thread Specification — Manufactured to the exact 6X10 thread pitch and shank dimensions specified for these machines, ensuring full thread engagement without cross-threading or stripping.
- Direct Drop-In Hardware — Installs into existing tapped or self-threading locations without reworking the hole or surrounding material, maintaining original torque retention as designed.
- Broad Equipment Compatibility — A single OEM part number that crosses multiple Multiquip families: MVH plate compactors, walk-behind rollers, concrete and mortar mixers, and masonry and flat saws.
- Corrosion-Resistant Construction — Built to withstand the wet concrete, dust, and outdoor exposure typical of compaction, mixing, and cutting applications, preserving clamp load over repeated service cycles.
- Structural Panel and Guard Retention — Correct fastener torque keeps covers, guards, and access panels seated properly, preventing vibration-induced loosening on high-cycle compaction and cutting equipment.
A tapping screw is a self-threading fastener designed to cut or form its own mating thread as it is driven into a pre-drilled hole in sheet metal, plastic, or light alloy components. On Multiquip equipment, these screws secure housings, protective guards, access panels, and control covers — keeping critical internal components shielded from debris, moisture, and mechanical damage. When a tapping screw fails through corrosion, over-torquing, or vibration fatigue, the component it retains can shift, rattle, or detach entirely, creating both a safety hazard and a potential source of secondary damage to the machine.
Part Details
| Part Number | 90006ZE2000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Tapping Screw 6X10 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH208GH |
| Rollers | MRH800GS |
| Rollers | V305EH |
| MQ Mixers | MC12PH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| Saws | SP118 |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Saws | SP1CE13H18 |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Multiquip