The Multiquip 90451ZE1000 Thrust Washer 6MM is a genuine OEM replacement component built for a wide range of Multiquip rammers, plate compactors, walk-behind trowels, mixers, saws, pumps, and generators. As a direct OEM part, the 90451ZE1000 is manufactured to the same specification as the original hardware installed at the factory, ensuring correct fit and function across all compatible equipment. Confirmed fitment includes MTX-series rammers such as the MTX50HD, MTX60HD, MTX70HD, MTX70HDR, MTX80HDR, and MTX70HF, as well as plate compactors including the MVC40H, MVC64VH, MVC64VHW, MVC82VH, MVC82VHW, MVC90H, MVB85H, and MVH158GH. Additional compatibility covers the MTR40HF, CA4HM, CA-4-4H, MC44S, QP205SH, GAC2.2HZ, and SP1G, among others.
Key Features
- Genuine OEM Construction — Manufactured to the exact material grade and dimensional tolerance of the original 6MM thrust washer, maintaining correct axial load distribution within the assembly.
- Direct Hardware Replacement — Installs in place of the original washer without any modification to the surrounding hardware stack or fastener torque specifications.
- Broad Multiquip Fitment — Compatible with MTX-series rammers, MVC/MVH/MVB plate compactors, walk-behind trowels, mixers, saws, pumps, and generators across the Multiquip product line.
- Axial Load Management — A correctly seated thrust washer prevents metal-on-metal contact between rotating and stationary components, protecting shafts and housings from accelerated wear.
- OEM Part Number Accuracy — Sourced directly under part number 90451ZE1000, eliminating the risk of receiving an incorrectly sized washer that could cause improper clearance or premature component failure.
A thrust washer is a thin, hardened disc positioned between rotating and stationary surfaces in a drivetrain or engine assembly to absorb axial thrust loads and control the amount of end-play in a shaft. It acts as a sacrificial bearing surface, keeping the faces of more expensive components from contacting each other directly. When a thrust washer wears thin or is missing entirely, shaft end-play increases, which leads to vibration, misalignment, and accelerated damage to adjacent components such as crankshafts, connecting rods, and housings.
Part Details
| Part Number | 90451ZE1000 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Thrust Washer 6MM |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rammers | MTX50HD |
| Plate Compactors | MVC40H |
| Plate Compactors | MVB85H |
| Rammers | MTR40HF |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Rammers | MTX80HDR |
| Rammers | MTX70HDR |
| Saws | SP1G |
| Rammers | MTX70HD |
| Rammers | MTX60HD |
| Plate Compactors | MVH158GH |
| Rammers | MTX60HF |
| MQ Mixers | MC44S |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Gasoline Powered Generators | GAC2.2HZ |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Plate Compactors | MVC90H |
| Centrifugal Pumps | QP205SH |
| Rammers | MTX70HF |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
