The Multiquip 95701060200 is a genuine OEM Flange Bolt 6x20 used across a wide range of Multiquip equipment families. As a genuine OEM component, it is manufactured to the exact thread pitch, head geometry, and flange diameter specified for each application — ensuring a secure, properly torqued connection every time. This bolt fits an extensive range of models including plate compactors such as the MVC82VHW, MVC82VH, MVC88VTHW, MVC88VTH, MVC64VHW, MVC64VH, MVC90H, MVH158GH, MVH128GH, and MVB85H; walk-behind and ride-on trowels including the CA4HM and JWN24HTCSL/HSCSL; rollers including the AR14H, AR13H, AR13HC, and AR13HA/HAR; mixers including the MC44S, MC64P/S, and WM70S/P; saws including the SP1G, MP1H, MP1455HP, MP120E, and MP115E; centrifugal pump QP205SH; vibrators G55H; and generator GA9.7HE. Always confirm this part number against your machine's serial plate or parts manual before ordering.
Key Features
- Genuine OEM Hardware Grade — Manufactured to Multiquip's exact specifications for thread class, flange diameter, and tensile strength — critical for fasteners that secure high-vibration assemblies.
- Integrated Flange Design — The built-in flange distributes clamping load evenly across the mating surface, eliminating the need for a separate washer and reducing the risk of joint loosening under load.
- Broad Cross-Family Compatibility — A single part number covering plate compactors, walk-behind and ride-on trowels, rollers, mixers, saws, pumps, vibrators, and generators across multiple Multiquip model lines.
- Direct Drop-In Replacement — Matches the OEM thread form and shank length exactly, so installation requires only standard hand tools with no re-drilling, re-tapping, or shimming.
- Vibration-Critical Application — On compactors, trowels, and similar high-cycle machines, an incorrectly sized or under-spec bolt can back out or shear; the correct OEM fastener maintains joint integrity through continuous vibration cycles.
A flange bolt combines a standard hex-head bolt with an integrated load-spreading flange beneath the head, functioning like a bolt and washer in a single piece. In vibration-intensive equipment such as plate compactors and concrete trowels, fasteners are subjected to constant cyclic stress that can cause standard bolts to loosen or fatigue prematurely. The flange distributes clamping force over a wider surface area, helping maintain consistent preload and preventing joint relaxation. When a fastener of the wrong grade or geometry is used in its place, the joint can lose clamping force, leading to component movement, accelerated wear on mating parts, and potential structural failure of the assembly it secures.
Part Details
| Part Number | 95701060200 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Flange Bolt 6x20 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Vibrators | G55H |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Saws | SP1G |
| Whiteman Ride-On Power Trowels | JWN24HTCSL/HSCSL |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Rollers | AR14H |
| Plate Compactors | MVB85H |
| Plate Compactors | MVH128GH |
| MQ Mixers | MC44S |
| Rollers | AR13HC |
| Rollers | AR13H |
| Rollers | AR13HA/HAR |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Whiteman Mixers | WM70S/P |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Centrifugal Pumps | QP205SH |
| Plate Compactors | MVC90H |
| Gasoline Powered Generators | GA9.7HE |
| MQ Mixers | MC64P/S |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
