The Multiquip CM26016 Ball Bearing 6204 2RS is a genuine OEM component designed for Collomix mixer models CX300HF, CX400HFE, CX600HF, CX600HFE, CX44DUO, and CX44DUOE. As a direct OEM replacement, CM26016 meets the original design tolerances specified for these mixers, ensuring the bearing seats and loads correctly within the drive assembly. Sourced directly through Multiquip's authorized parts program, this bearing is the same specification as the unit installed at the factory.
Key Features
- Double-Sealed Bearing Construction — The 6204 2RS designation confirms rubber seals on both sides, retaining internal grease and blocking contaminants common in mixing environments such as mortar dust and moisture.
- OEM-Matched Dimensional Tolerancing — Bore, outer diameter, and width are held to the original specification, so the bearing drops into the existing housing without rework or shimming.
- Broad Collomix Mixer Compatibility — Confirmed fitment across CX300HF, CX400HFE, CX600HF, CX600HFE, CX44DUO, and CX44DUOE models with a single part number.
- Smooth Drive Shaft Support — A correctly spec'd bearing keeps shaft runout tight, which directly affects mixing consistency and reduces stress on the motor and chuck assembly.
- Genuine Multiquip OEM Part — Supplied through the authorized Multiquip parts network, CM26016 carries the same traceability and quality assurance as the original production component.
A ball bearing supports and centers the rotating shaft inside a mixer's drive assembly, allowing the shaft to spin freely while carrying both radial and axial loads generated during mixing. The double-rubber-sealed 6204 2RS design keeps lubricant in and abrasive particles out, which is especially important in the wet, grit-laden conditions typical of mortar and plaster mixing. When this bearing wears or loses its seals, shaft play increases, leading to vibration, accelerated wear on surrounding components, and eventual loss of drive performance.
Part Details
| Part Number | CM26016 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Ball Bearing 6204 2RS |
Compatibility & Fitment
| Name | Model |
|---|---|
| Collomix Mixers | CX300HF |
| Collomix Mixers | CX400HFE |
| Collomix Mixers | CX600HF |
| Collomix Mixers | CX600HFE |
| Collomix Mixers | CX44DUO |
| Collomix Mixers | CX44DUOE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
