The Multiquip D0901002100 is a genuine OEM Control Valve, 3 Way 3 Position designed for Multiquip rebar bender models JB5135, JB5090, JB9180, JB11090, JB7135, JB7090, JB8090, and JPU1. As a direct OEM replacement, this valve is built to the exact specifications required to maintain proper hydraulic circuit control across the full range of compatible benders. Source your replacement with confidence knowing D0901002100 is the correct part for your machine — not a generic substitute. DHS Equipment supplies this as an authorized Multiquip parts distributor, so you receive the same component that came on your equipment originally.
Key Features
- Genuine OEM Hydraulic Specification — Manufactured to Multiquip's exact flow, pressure, and porting requirements for this valve position configuration, ensuring correct hydraulic circuit response.
- Direct-Swap Installation — Matches the original port layout and mounting interface of the factory valve, so the D0901002100 drops in without reworking hydraulic lines or fittings.
- Broad Rebar Bender Coverage — Fits JB5090, JB5135, JB7090, JB7135, JB8090, JB9180, JB11090, and JPU1 models, making this a key service item across the Multiquip rebar bender lineup.
- Precise Directional Control — A correctly functioning 3 way 3 position valve gives the operator full command over the bending cylinder — advance, hold, and retract — with clean, predictable response on every cycle.
- Hydraulic System Safety — A worn or failed directional control valve can cause uncontrolled cylinder movement or loss of hold position, creating a hazard during rebar bending operations. Replacing with an OEM-spec unit restores safe, controlled function.
The Control Valve, 3 Way 3 Position directs hydraulic fluid flow through three distinct paths — forward, neutral, and reverse — allowing the operator to advance and retract the bending cylinder with a single valve body. In the neutral (center) position, the valve blocks flow and holds the cylinder stationary under load, which is critical during the bending cycle. When this valve wears or develops internal leakage, the cylinder may drift, lose holding force, or fail to return fully, compromising both bend accuracy and operator safety.
Need help confirming this is the right part for your machine? Contact the DHS Equipment parts team with your model and serial number and we'll verify fitment before you order.
Part Details
| Part Number | D0901002100 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Control Valve, 3 Way 3 Position |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rebar Benders | JB5135 |
| Rebar Benders | JB5090 |
| Rebar Benders | JB9180 |
| Rebar Benders | JB11090 |
| Rebar Benders | JPU1 |
| Rebar Benders | JB7135 |
| Rebar Benders | JB7090 |
| Rebar Benders | JB8090 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
