The Multiquip E0539910104 is a genuine OEM Bolt Kit designed for Multiquip rebar bender models including JB5135, JB7090, JB8090, JB5090, JB7135, JB9180, JB11090, and JPU1. As a direct OEM replacement, every fastener in this kit meets the original design specifications set by Multiquip, ensuring proper fit and correct clamping loads throughout the assembly. Sourced directly through authorized channels, the part is the right choice when you need a verified, machine-matched hardware solution for your rebar bending equipment. DHS Equipment stocks this kit ready to ship so you can get your machine back in service without delay.
Key Features
- OEM-Grade Fastener Specification — Each bolt in this kit is manufactured to the exact thread pitch, grade, and dimensional tolerances required by Multiquip, ensuring correct torque capacity and secure fastening across all mounting points.
- Drop-In Hardware Replacement — Bolts are pre-matched to the corresponding bores and threaded interfaces on these machines, so installation aligns with the original assembly without re-drilling or re-tapping.
- Broad Rebar Bender Compatibility — Covers a wide range of Multiquip rebar bender models: JB5090, JB5135, JB7090, JB7135, JB8090, JB9180, JB11090, and JPU1.
- Structural Integrity Maintained — Correct fastener grade and sizing prevent joint loosening under the cyclic bending loads that rebar equipment produces during operation, protecting the machine's frame and tooling components from premature wear.
- Operational Safety Compliance — On bending equipment that applies high mechanical force, using fasteners of the correct grade and specification is critical; substituting incorrect hardware risks bolt failure and loss of machine control during a bending cycle.
A bolt kit provides the complete set of fasteners required to properly assemble or reassemble key structural and operational joints on a rebar bender. On equipment like rebar benders, fasteners are subjected to repeated high-stress bending forces, making correct grade and fit essential — an undersized or incorrect-grade bolt can back out or shear under load, causing misalignment of the bending tooling or mechanical failure mid-cycle. Replacing worn, damaged, or lost fasteners with the correct OEM-specified hardware restores the clamping force and structural rigidity the machine was designed to operate with.
Part Details
| Part Number | E0539910104 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Bolt Kit |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rebar Benders | JB5135 |
| Rebar Benders | JB7090 |
| Rebar Benders | JB8090 |
| Rebar Benders | JPU1 |
| Rebar Benders | JB7135 |
| Rebar Benders | JB5090 |
| Rebar Benders | JB9180 |
| Rebar Benders | JB11090 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
