The Multiquip EM16512 Governor Weight Holder is a genuine OEM component designed for a wide range of Multiquip equipment, including MVC and MVH plate compactors, AR series rollers, QP centrifugal and trash pumps, GA series generators, MC and WM mixers, MP and SP masonry saws, and walk-behind and ride-on power trowels. As a direct OEM replacement, the EM16512 is produced to the same specifications as the original part, ensuring correct fit and function across all listed models. Sourced through DHS Equipment, this part is backed by Multiquip's OEM supply chain for verified part number accuracy. Confirm your model code against the fitment list before ordering to ensure compatibility.
Key Features
- OEM-Spec Governor Retention: — Manufactured to original tolerances so the governor weights seat and pivot correctly, maintaining consistent engine speed control across load changes.
- Drop-In Fitment: — Replaces the original holder using existing mounting points; no fabrication or reworking of surrounding governor components required.
- Broad Cross-Equipment Compatibility: — Fits MVC64, MVC82, MVC88, MVC90, MVH128, MVH208, MVH308, MVH408, AR13, AR14, QP205SH, QP402H, QP3TH, and numerous MC, WM, GA, MP, and SP series units.
- Engine Speed Integrity: — A worn or cracked holder allows governor weights to shift improperly, causing rpm fluctuations, surging, or loss of governed speed — replacing it restores stable engine output.
- Fuel System Safety Relevance: — Correct governor operation prevents over-revving under no-load conditions, protecting the engine and fuel system from stress-related damage.
The governor weight holder is a structural component within the mechanical governor assembly of a gasoline engine. It retains the centrifugal flyweights that respond to changes in engine speed — as rpm rises or falls, these weights pivot outward or inward to signal the carburetor or throttle linkage to adjust fuel delivery and maintain a steady governed speed. When the holder cracks, wears, or breaks, the flyweights lose their reference position, causing the engine to hunt, surge, or fail to hold a consistent rpm under load — conditions that directly affect the output quality of compactors, mixers, pumps, saws, and generators alike.
Part Details
| Part Number | EM16512 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Governor Weight Holder |
Compatibility & Fitment
| Name | Model |
|---|---|
| Centrifugal Pumps | QP205SH |
| Centrifugal Pumps | QP402H |
| Essick Mixers | EM120P Series |
| Essick Mixers | EM120S Series |
| Gasoline Powered Generators | GA2.5HR |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA3.6HR |
| Gasoline Powered Generators | GA3.6HZ |
| Gasoline Powered Generators | GA6HB |
| Gasoline Powered Generators | GA6HEB |
| Gasoline Powered Generators | GA6HZ |
| Gasoline Powered Generators | GA9.7HE |
| Gasoline Powered Generators | GAC2.2HZ |
| Gasoline Powered Generators | GAC2.5HR |
| International Walk-Behind Power Trowels | CA-4-4H |
| MQ Mixers | MC12PH |
| MQ Mixers | MC44S |
| MQ Mixers | MC64P/S |
| MQ Mixers | MC94P/S |
| MQ Mixers | MC94SK/MC94PK |
| Plate Compactors | MVB85H |
| Plate Compactors | MVC64VH |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC82VH |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC88VTH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC90H |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH304GSB |
| Plate Compactors | MVH308GH |
| Plate Compactors | MVH408GH |
| Rollers | AR13H |
| Rollers | AR13HA/HAR |
| Rollers | AR13HC |
| Rollers | AR14H |
| Rollers | MRH800GS |
| Rollers | R2000H |
| Rollers | V305EH |
| Saws | MP115E |
| Saws | MP120E |
| Saws | MP1455HP |
| Saws | MP1H |
| Saws | MP2050E1 |
| Saws | MP2050E3 |
| Saws | MP2090HP |
| Saws | MP25E1 |
| Saws | MP25E3 |
| Saws | MP275E3 |
| Saws | MP2H |
| Saws | SP118 |
| Saws | SP1CE13H18 |
| Centrifugal Pumps | QP3TH |
| Vibrators | G55H |
| Welders | GAW180HE |
| Welders | GAW180HE1 |
| Welders | GAW180HEA |
| Whiteman Mixers | WM120PH |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM70S/P |
| Whiteman Ride-On Power Trowels | JWN24HTCSL/HSCSL |
| Whiteman Walk-Behind Power Trowels | CA4HM |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
