The Multiquip EM23832 is a genuine OEM Outer Blade Flange designed for Multiquip and STOW masonry saw models including MP1H, MP115E, MP120E, MP1455H, MP1420E, MP1415E, MP25E1, MP25E3, MP2050E1, MP2050E3, MP2090HP, MP275E3, MP1455HP, MP2H, MASONPROMP1, TRAK-14, MS1455H, MS1415E, MS1420E, and MS2050E1. As a direct OEM replacement sourced from Multiquip, this flange meets the original design specification for blade retention and alignment on these machines. Confirm your model code against the fitment list before ordering to ensure a correct, trouble-free installation.
Key Features
- Genuine OEM Blade Retention Spec — Manufactured to the original design tolerance for clamping force and concentricity, so your saw blade runs true and cuts cleanly from the first pass.
- Direct Bolt-On Replacement — Matches the original mounting pattern and thread spec of the EM23832 position, so installation follows the same procedure as the factory flange.
- Wide Masonry Saw Compatibility — Fits an extensive range of MQ Masonry Pro and STOW masonry saw models, including MP1H, MP1455H, MP2050E1, TRAK-14, MS1455H, and MS2050E1 among others.
- Blade Stability Under Load — A correctly seated outer flange keeps the blade clamped squarely against the arbor, preventing wobble and maintaining straight, accurate cuts through block, brick, and pavers.
- Operator Safety at the Blade Interface — The outer flange is a critical blade-retention component; using a correctly rated OEM part at this position helps ensure the blade is secured in accordance with the machine's original design intent.
The outer blade flange is the clamping collar that presses against the outer face of the saw blade and locks it firmly onto the arbor shaft alongside the inner flange. Together, the two flanges sandwich the blade and transfer rotational force from the arbor evenly across the blade's bore. When the outer flange is worn, cracked, or improperly fitted, clamping pressure becomes uneven, which can cause blade slippage, lateral runout, or premature blade wear — and on a masonry saw running abrasive cutting discs, any of those conditions degrade cut quality quickly and increase risk at the cutting station. Replacing a damaged outer flange with the correct OEM part restores the full clamping integrity the machine was designed to deliver.
| Fits: MP1H, MP115E, MP120E, MASONPROMP1, MP1455H, MP1420E, MP25E1, MP25E3, MP2050E1, TRAK-14, MS1455H, MS1415E, MP1455HP, MP1415E, MP275E3, MP2H, MP2050E3, MP2090HP, MS1420E, MS2050E1
Have questions about fitment or need help confirming compatibility? Contact DHS Equipment — our parts team is ready to help you get the right part for your machine.
Part Details
| Part Number | 23832-001 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Outer Blade Flange |
Compatibility & Fitment
| Name | Model |
|---|---|
| Saws | MP1H |
| Saws | MP115E |
| Saws | MP120E |
| Masonry Saws | MASONPROMP1 |
| Saws | MP1455H |
| Saws | MP1420E |
| Saws | MP25E1 |
| Saws | MP25E3 |
| Saws | MP2050E1 |
| STOW Masonry Saws | TRAK-14 |
| STOW Masonry Saws | MS1455H |
| STOW Masonry Saws | MS1415E |
| Saws | MP1455HP |
| Saws | MP1415E |
| Saws | MP275E3 |
| Saws | MP2H |
| Saws | MP2050E3 |
| Saws | MP2090HP |
| STOW Masonry Saws | MS1420E |
| STOW Masonry Saws | MS2050E1 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
