The Multiquip EM916019 is a genuine OEM Grease Fitting designed for a wide range of Multiquip, Whiteman, and Essick equipment including WTB-16, WBH-16, and WBH-21 series power buggies, WM63, WM70, WM90, and WM120 series mixers, EM70, EM90, EM120, and PRO12 Essick mixers, and V304, V305, and R2000H series rollers. As a genuine OEM component sourced directly through Multiquip, part number EM916019 is manufactured to the same standards as the original part installed at the factory. Verify your model against the fitment list to confirm this is the correct Grease Fitting for your machine before ordering.
Key Features
- Genuine OEM Grease Fitting: — Manufactured to exact original specifications, ensuring the correct thread pitch, seat angle, and grease flow path for proper lubrication delivery.
- Direct-Thread Replacement: — Threads directly into the original grease port with no rework required, maintaining a leak-free seal at the fitting seat.
- Broad Fitment Coverage: — Compatible with WTB-16, WBH-16, WBH-21, WM63, WM70, WM90, WM120, EM70, EM90, EM120, PRO12, V304, V305, and R2000H series equipment.
- Consistent Lubrication Path: — A correctly seated grease fitting allows grease to flow freely under gun pressure, protecting bearings and pivots from friction wear and premature failure.
- Corrosion-Resistant Construction: — Built to withstand the outdoor and jobsite conditions typical of concrete mixing, compaction, and roller applications where moisture and debris are constant factors.
A grease fitting — sometimes called a Zerk fitting — is the service point through which a grease gun delivers lubricant to a bearing, pivot, or joint inside a machine. The fitting contains a small internal check ball that opens under grease gun pressure, allowing grease in, and closes to keep contaminants out when the gun is removed. A damaged, clogged, or cross-threaded grease fitting prevents proper lubrication from reaching critical wear surfaces, which leads to accelerated bearing wear, increased heat, and eventual component failure. Replacing a faulty fitting promptly is one of the simplest and most cost-effective preventive maintenance steps an operator can perform.
For fitment questions or help confirming compatibility with your specific model, contact the DHS Equipment parts team directly.
Part Details
| Part Number | EM916019 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Grease Fitting |
Compatibility & Fitment
| Name | Model |
|---|---|
| Power Buggies | WTB-16PD |
| Power Buggies | WBH-21EFP |
| Rollers | V305EK |
| Whiteman Mixers | WM90PLF |
| Whiteman Mixers | WM90SLF |
| Whiteman Mixers | WM70PLF |
| Whiteman Mixers | WM70SLF |
| Whiteman Mixers | WM63SLF |
| Essick Mixers | EM90SLF |
| Essick Mixers | EM70SLF |
| Whiteman Mixers | WM70S/P |
| Whiteman Mixers | WM63H8 |
| Whiteman Mixers | WM63H5 |
| Whiteman Mixers | WM63E |
| Power Buggies | WBH-21EF |
| Power Buggies | WTB-16 |
| Power Buggies | WBH-16F |
| Power Buggies | WBH-16EF |
| Power Buggies | WBH-16E |
| Power Buggies | WBH-16 |
| Power Buggies | WBH-16EAWDF |
| Power Buggies | WBH-16EAWD |
| Essick Mixers | EM120 |
| Rollers | V305EH |
| Essick Mixers | PRO12E53 |
| Essick Mixers | PRO12E51 |
| Essick Mixers | PRO12 |
| Essick Mixers | EM900SD |
| Whiteman Mixers | WM90S/P |
| Essick Mixers | EM70P/S |
| Essick Mixers | EM90P/S |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Rollers | V304EY |
| Rollers | V304ER |
| Rollers | V304EH |
| Rollers | R2000H |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
