The Multiquip RB252705 Puller Arm (Left & Right) is a genuine OEM replacement designed for Multiquip rebar bender models JB5135, JB7135, JB5090, JB7090, JB8090, JB9180, JB11090, and JPU1. As a direct OEM component, it is manufactured to the exact specifications required to restore full bending function to your machine. This arm set is sold as a matched left and right pair, ensuring proper installation and balanced operation across the bending mechanism. Sourced directly through authorized Multiquip supply channels, the part is the correct replacement when your existing puller arm is worn, cracked, or damaged.
Key Features
- Matched Arm Pair: — Supplied as a complete left and right set, so both sides of the bending assembly are replaced together for balanced, consistent performance.
- Genuine OEM Construction: — Built to Multiquip's exact material and dimensional standards for the puller arm, ensuring the bending force is transmitted correctly without flex or premature fatigue.
- Broad Rebar Bender Compatibility: — Confirmed fitment across JB5135, JB7135, JB5090, JB7090, JB8090, JB9180, JB11090, and JPU1 models — covering both 90° and 135° bending configurations.
- Restores Full Bending Capacity: — A worn or cracked puller arm causes inconsistent bend angles, slippage, or complete bending failure; replacing with the correct OEM arm brings the machine back to full rated capacity.
- Direct-Fit Replacement: — Engineered to align with existing pivot points and hardware on compatible Multiquip rebar benders, allowing straightforward swap-out without reworking surrounding components.
The puller arm is the primary working component in a rebar bender's bending mechanism. As the machine cycles, the puller arm applies controlled lateral force against the rebar, bending it around a central die to the programmed angle. The arm must maintain rigidity under repeated high-load cycles — if it develops cracks, deformation, or excessive wear at the pivot points, the machine will produce inaccurate bends or lose the mechanical leverage needed to complete a full cycle. Replacing a damaged puller arm promptly with a genuine OEM part like the Multiquip RB252705 is essential to keeping bend angles accurate and protecting the surrounding drive components from secondary stress.
For fitment questions or to confirm compatibility with your specific unit, contact DHS Equipment — our team is ready to help you identify the right part for your machine.
Part Details
| Part Number | RB252705 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Puller Arm (Left & Right) |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rebar Benders | JB5135 |
| Rebar Benders | JB7135 |
| Rebar Benders | JB5090 |
| Rebar Benders | JB7090 |
| Rebar Benders | JB8090 |
| Rebar Benders | JB9180 |
| Rebar Benders | JB11090 |
| Rebar Benders | JPU1 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
