The Multiquip RB252815 is a genuine OEM Cap Screw 1/2-20 X 1-1/4 Lg designed for Multiquip rebar bender models including JB5090, JB5135, JB7090, JB7135, JB8090, JB9180, JB11090, and JPU1. As a factory-sourced fastener, it meets the exact thread pitch, grade, and dimensional tolerances specified for these machines. Sourcing the correct cap screw by part number RB252815 ensures the fastened joint holds to spec under the high cyclical loads rebar bending equipment generates. DHS Equipment supplies this genuine OEM part direct, so you can confirm the fit before you order and get the machine back in service fast.
Key Features
- Correct Thread Specification: — Cut to 1/2-20 UNF thread pitch and 1-1/4 inch grip length, matching the precise fastener specification called out in Multiquip factory documentation for these rebar benders.
- Genuine OEM Construction: — Manufactured to the same material grade and head geometry as the original hardware, so clamping load and torque values remain consistent with machine design intent.
- Broad JB-Series Compatibility: — Confirmed fitment across JB5090, JB5135, JB7090, JB7135, JB8090, JB9180, JB11090, and JPU1 rebar bender models, covering the full current Multiquip bender lineup.
- Structural Integrity Under Load: — Rebar benders place sustained bending force on every fastened joint; a correctly graded cap screw prevents joint loosening, elongation, or shear failure during repeated bending cycles.
- Drop-In Replacement: — Same head drive type, shank diameter, and length as the factory-installed fastener, so installation requires only standard hand tools already on the truck.
A cap screw is a precision-grade threaded fastener used to clamp and secure structural assemblies, brackets, and mechanical components together on heavy equipment. Unlike a standard bolt, a cap screw is designed to thread directly into a tapped hole or a close-tolerance nut, providing a tight, controlled clamping force critical to maintaining alignment and rigidity in a working assembly. On rebar bending equipment, where high bending forces are applied repeatedly in a short cycle, any fastener that has stretched, corroded, or lost clamping force can allow movement between components, accelerating wear on mating surfaces and ultimately causing misalignment or mechanical failure. Replacing a worn or damaged cap screw with the correct OEM specification fastener — right thread form, right length, right grade — restores the joint to its designed clamping load and keeps the machine operating safely and accurately.
Part Details
| Part Number | RB252815 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Cap Screw 1/2-20 X 1-1/4 Lg |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rebar Benders | JB7135 |
| Rebar Benders | JB5090 |
| Rebar Benders | JB8090 |
| Rebar Benders | JB9180 |
| Rebar Benders | JB5135 |
| Rebar Benders | JB7090 |
| Rebar Benders | JB11090 |
| Rebar Benders | JPU1 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
