The Multiquip RB252835 is a genuine OEM Jam Nut (3/4-16) designed for Multiquip rebar bender models JB5135, JB5090, JB8090, JB9180, JPU1, JB7135, JB7090, and JB11090. As a direct OEM replacement, this fastener is manufactured to the exact thread specification and material standard required by your machine, ensuring a secure, properly torqued fit without guesswork. Sourced directly through Multiquip's authorized parts network, the part is the correct part for keeping your rebar bender operating as intended. DHS Equipment stocks genuine Multiquip OEM components so you can order with confidence and get back to work without delay.
Key Features
- Exact Thread Specification: — Cut to a precise 3/4-16 UNF thread pitch, matching the original fastener specification for a proper, full-engagement fit on the machine's threaded shaft or rod end.
- Genuine OEM Quality: — Manufactured to Multiquip's original material and hardness standards, so the nut holds its locking position under the cyclical loads common to rebar bending operations.
- Broad Rebar Bender Compatibility: — Confirmed fitment across the JB5135, JB5090, JB8090, JB9180, JPU1, JB7135, JB7090, and JB11090 rebar bender models, covering both compact and heavy-duty units in the JB series.
- Locks Critical Adjustments in Place: — A jam nut that is worn, stripped, or incorrectly sized allows bending stop positions and depth settings to shift during operation, leading to inaccurate bends and repeated re-adjustment.
- Direct Drop-In Replacement: — Replaces the original fastener without any modification to the threaded rod, shaft, or adjacent hardware — install with a standard wrench and torque to spec.
A jam nut is a thin locking nut threaded against a primary nut or up to a fixed stop to prevent loosening under vibration and load. On Multiquip rebar benders, jam nuts are used to secure adjustment points — such as bending stop rods and depth-setting assemblies — so that bend angle settings remain consistent throughout the work cycle. When a jam nut strips, cracks, or backs off over time, the adjustment it was holding can shift mid-use, producing inconsistent bends and requiring the operator to stop and re-set the machine. Replacing a worn or damaged jam nut promptly with the correct this part restores the integrity of those adjustments and keeps bends accurate and repeatable.
Part Details
| Part Number | RB252835 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Jam Nut (3/4-16) |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rebar Benders | JB5135 |
| Rebar Benders | JB5090 |
| Rebar Benders | JB8090 |
| Rebar Benders | JB9180 |
| Rebar Benders | JPU1 |
| Rebar Benders | JB7135 |
| Rebar Benders | JB7090 |
| Rebar Benders | JB11090 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
