The Multiquip 022720607 is a genuine OEM Nylon Nut M6 H=6.6 designed for the MVH-702DRSC reversible plate compactor. Sourced directly from Multiquip, this fastener matches the exact thread profile, height, and nylon locking collar specification called out in the original equipment design. Verified for use on the MVH-702DRSC, it installs directly in place of the worn or missing original with no modification to surrounding hardware.
Key Features
- Genuine OEM Nylon Locking Integrity — The nylon insert is molded to the precise collar depth required to maintain consistent prevailing torque on the MVH-702DRSC's fastener joints, matching the original design exactly.
- Correct M6 Thread Specification — Machined to M6 threading with a 6.6 mm height profile, this nut seats and torques to the same specification as the part it replaces.
- Direct Fitment for MVH-702DRSC — Confirmed OEM fit for the Multiquip MVH-702DRSC reversible plate compactor; cross-reference part number 022720607 against your parts manual before ordering.
- Vibration-Resistant Fastening — The nylon locking insert resists back-off caused by the sustained vibration loads generated during plate compaction cycles, keeping critical fastener joints secure through heavy use.
- Single-Component Replacement — Replacing individual fasteners like this nut at the point of service prevents joint loosening from escalating into structural wear on compactor components.
A nylon insert lock nut uses an integrated nylon collar near the top of the nut to create interference with the bolt thread, resisting loosening under vibration without the need for additional locking compounds or washers. On a reversible plate compactor like the MVH-702DRSC, mechanical vibration is continuous and intense during operation, meaning standard nuts without locking features can gradually back off and compromise structural or mechanical connections. When a nylon nut loses its locking effectiveness — whether from heat cycling, over-torquing, or reuse — joint integrity is reduced and surrounding components can shift, wear prematurely, or detach.
Part Details
| Part Number | 022720607 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Nylon Nut M6 H=6.6 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH-702DRSC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
