The Multiquip 169 Valve Lever is a genuine OEM Valve Lever sourced directly from Multiquip and engineered for use across a wide range of Multiquip equipment families, including WRS ride-on screeds, MVC and MVH plate compactors, MTX rammers, MRH and V305EH rollers, AR asphalt rollers, WM and MC mixers, QP pumps, GA and GAC generators, GAW welders, MP masonry saws, SP flat saws, and CA and MD power trowels. As a genuine OEM component, this part meets the same design and material specifications as the original part installed at the factory. Confirm your model code against the fitment list to ensure this is the correct Valve Lever for your machine before ordering.
Key Features
- Genuine OEM Construction — Manufactured to Multiquip's original material and dimensional specifications, ensuring the lever engages and seats correctly within the valve assembly.
- Direct Drop-In Replacement — Designed to install in place of the original Valve Lever with no machining or modification to mounting points or actuating hardware.
- Broad Equipment Compatibility — Fits an extensive range of Multiquip models across screeds, compactors, rammers, rollers, mixers, pumps, generators, welders, saws, and trowels including WRS5200, MVC82VHW, MVH208GH, MTX70HD, AR13H, and MC94P/S.
- Consistent Valve Actuation — A worn or bent valve lever causes erratic fluid or air flow control, leading to inconsistent machine operation; a fresh OEM lever restores precise, repeatable actuation every cycle.
- Verified Part Number — Order with confidence using Multiquip part number 169, cross-referenced against the original equipment bill of materials.
A valve lever is the mechanical linkage that physically actuates a valve within the machine's fluid, fuel, or air control circuit. By converting operator input or mechanical movement into valve opening and closing, the lever determines when flow starts, stops, or changes direction. When the lever is cracked, bent, or worn at its pivot point, the valve may fail to open fully, close completely, or respond predictably — resulting in poor flow control, pressure irregularities, or complete loss of function in the system it governs. Replacing a damaged lever with a correct OEM part restores full valve travel and reliable system response.
For fitment questions or help confirming compatibility with your specific Multiquip model, contact DHS Equipment directly.
Part Details
| Part Number | 169 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Valve Lever |
Compatibility & Fitment
| Name | Model |
|---|---|
| Ride-On Roller Screeds | WRSPUDF |
| Ride-On Roller Screeds | WRS5200 |
| Ride-On Roller Screeds | WRS5200DFPU |
| MQ Mixers | MC94P/S |
| Rollers | MRH800GS |
| Plate Compactors | MVC82VHW |
| Plate Compactors | MVC82VH |
| MQ Mixers | MC94SK/MC94PK |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVB85H |
| Plate Compactors | MVH128GH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Rollers | V305EH |
| Saws | SP1G |
| MQ Mixers | MC12PH |
| MQ Mixers | MC64P/S |
| Whiteman Mixers | WM70S/P |
| MQ Mixers | MC44S |
| Centrifugal Pumps | QP205SH |
| Saws | SP118 |
| Saws | MP2090HP |
| Saws | MP2050E3 |
| Saws | MP2050E1 |
| Saws | MP2H |
| Saws | MP275E3 |
| Saws | MP25E3 |
| Saws | MP25E1 |
| Saws | MP1455HP |
| Saws | MP120E |
| Saws | MP115E |
| Saws | MP1H |
| Rollers | R2000H |
| Saws | SP1CE13H18 |
| Centrifugal Pumps | QP402H |
| Plate Compactors | MVC90H |
| Plate Compactors | MVC64VHW |
| Plate Compactors | MVC64VH |
| International Walk-Behind Power Trowels | CA-4-4H |
| Plate Compactors | MVH304GSB |
| Vibrators | G55H |
| Trash Pumps | QP3TH |
| Gasoline Powered Generators | GA6HZ |
| Plate Compactors | MVC40H |
| Whiteman Mixers | WM120SH |
| Whiteman Mixers | WM120PH |
| Essick Mixers | EM120S Series |
| Essick Mixers | EM120P Series |
| Gasoline Powered Generators | GAC6HRS |
| Gasoline Powered Generators | GAC6HR |
| Gasoline Powered Generators | GAC3.6HR |
| Welders | GAW180HE |
| Welders | GAW180HE1 |
| Welders | GAW180HEA |
| Gasoline Powered Generators | GA3.6HA |
| Gasoline Powered Generators | GA6HR/GA6HRS/GA6HRSNC2 |
| Gasoline Powered Generators | GA3.6HR |
| Gasoline Powered Generators | GA6HEB |
| Gasoline Powered Generators | GA6HB |
| Gasoline Powered Generators | GA2.5HR |
| Gasoline Powered Generators | GAC2.5HR |
| Gasoline Powered Generators | GAC2.2HZ |
| Trash Pumps | QP3TS |
| Welders | GAW135H |
| Plate Compactors | MVH508DZ |
| Whiteman Ride-On Power Trowels | JWN24HTCSL/HSCSL |
| Rollers | AR13HA/HAR |
| Rollers | AR13H |
| Gasoline Powered Generators | GA9.7HE |
| Rollers | AR13HC |
| Hydraulic Ride-On Power Trowels | MD105 |
| Power Buggies | WTB-16 |
| Power Buggies | WTB-16PD |
| Gasoline Powered Generators | GAC9.7HEA |
| Gasoline Powered Generators | GA-9.7HEA |
| Rollers | AR14H |
| International Ride-On Power Trowels | JTNSW24HTCSL |
| International Ride-On Power Trowels | JTNSW20HTCSL |
| Saws | SP2S20H |
| Rammers | MTX60HD |
| Rammers | MTX70HD |
| Rammers | MTX50HD |
| Rammers | MTX80HDR |
| Rammers | MTX70HDR |
| Rammers | MTX60HF |
| Plate Compactors | MVH508GH |
| Plate Compactors | MVH408DZ |
| Plate Compactors | MVH308DZ |
| Rammers | MTR40HF |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
