The Multiquip 3216 is a genuine OEM Cotter Pin designed for a wide range of Multiquip and Stow equipment, including MP, SP2, CS8, and CA series masonry saws, flat saws, pavement saws, and walk-behind power trowels. As an authentic OEM component sourced directly from Multiquip, it meets the exact material and dimensional specifications of the original part. This pin is confirmed to fit models including MP2H, MP25E1, MP275E3, SP2, SP213H20, CS813H20, CS820H20, CA4HC, CA4HM, and many additional models across the Stow pavement saw and Whiteman walk-behind trowel lines. Having the correct replacement on hand keeps these machines operating without interruption on the jobsite.
Key Features
- Genuine OEM Material Spec — Manufactured to the same shear strength and diameter tolerances as the original, ensuring the pin performs correctly under load without premature failure or deformation.
- Drop-In Installation — Matches the original bore diameter and retaining geometry for direct installation without reworking the mounting point.
- Broad Cross-Family Fitment — Compatible across MP, SP2, CS8, CC8, CA, and BTO series equipment, covering masonry saws, flat saws, pavement saws, and walk-behind trowels including MP2H, SP213H20, CS813H20, CA4HC, CA4HM, and CA4.4HM.
- Retains Critical Fasteners in Place — Cotter pins in saw and trowel assemblies prevent clevis pins, axle pins, and linkage hardware from backing out during vibration-heavy operation; a worn or missing pin can result in component separation mid-use.
- Safety-Critical Retention Component — On blade guards, depth adjustment linkages, and trowel arm pivot assemblies, a correctly installed cotter pin is a primary safeguard against unintended fastener release during cutting or finishing operations.
A cotter pin is a small split or solid fastener inserted through a drilled hole in a pin or shaft to lock it in position and prevent lateral movement or withdrawal. On saws and power trowels, cotter pins are commonly used to secure clevis pins in depth-adjustment mechanisms, blade guard linkages, wheel assemblies, and pivot arms — anywhere that a removable pin must be held firmly against vibration. When a cotter pin shears, corrodes, or goes missing, the retained pin can work free, causing slop in the linkage, unexpected movement of guarded components, or complete disengagement of the connected hardware. Replacing a worn or missing cotter pin promptly restores the mechanical integrity of the fastened joint.
Verify your model number against the fitment list before ordering. If you need help confirming compatibility for your specific unit, contact the DHS Equipment parts team for assistance.
Part Details
| Part Number | 3216 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Cotter Pin |
Compatibility & Fitment
| Name | Model |
|---|---|
| Saws | MP25E1 |
| Saws | MP275E3 |
| Saws | MP2H |
| Saws | MP2050E1 |
| Saws | MP2090HP |
| Stow Pavement Saws | CUTTER3 |
| Stow Pavement Saws | CC8CE13H20 |
| Stow Pavement Saws | CS8CE20H20 |
| Stow Pavement Saws | CC813H20 |
| Flat Saws | SP2S20H20A |
| Flat Saws | SP2CE13H20 |
| Flat Saws | SP2SCE13H20 |
| Flat Saws | SP2SCE20H20 |
| Flat Saws | SP2 |
| Flat Saws | SP213H20 |
| Flat Saws | SP2S20H20 |
| Mechanical Ride-On Trowels | BTO20HTCSL |
| Mechanical Ride-On Trowels | JTN |
| Mechanical Ride-On Trowels | JTO |
| Walk-Behind Trowels | C-4 |
| C and CA Series | CA4HC |
| Saws | MP25E3 |
| Saws | MP2050E3 |
| Masonry Saws | MS2050E1 |
| Stow Pavement Saws | CS8CE13H20 |
| Stow Pavement Saws | CS813H20 |
| Stow Pavement Saws | CS820H20 |
| Flat Saws | SP213H20A |
| Flat Saws | SP2S13H20A |
| Flat Saws | SP2S13H20 |
| Flat Saws | N35244 |
| International Walk-Behind Power Trowels | CA-4-4H |
| Whiteman Walk-Behind Power Trowels | CA4HC/CA5BC |
| Whiteman Walk-Behind Power Trowels | CA4HM |
| Wheel Kits | UWK1 |
| Wheel Kits | UWK1A |
| Wheel Kits | UWK2 |
| Wheel Kits | UWK2A |
| Power Trowels | CA4.4HM |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
