The Multiquip 54192 Allen Head Cap Screw M4x30 is a genuine OEM fastener designed for Multiquip roller equipment including the RW1404MR, RW1504HF, and P33/24 HHMR-BD models. As a factory-sourced component, part 54192 is manufactured to the exact thread pitch, head geometry, and material specification required for secure installation in these machines. Sourcing the correct OEM fastener ensures proper clamp load and thread engagement — critical in high-vibration roller applications where an incorrect screw can back out or cause component damage. DHS Equipment stocks this part to keep your roller running without unplanned delays.
Key Features
- Exact Thread and Dimension Spec: — M4x30 sizing matches the precise thread pitch and length required by the OEM design, ensuring full thread engagement without bottoming out or stripping.
- High-Vibration Fastener Grade: — Manufactured to the material and hardness grade specified for roller assemblies, where sustained vibration demands more than a standard hardware-store substitute.
- Confirmed Roller Fitment: — Verified for use on RW1404MR (including S/N 326075 and up), RW1504HF (up to S/N 1534188), and P33/24 HHMR-BD w/Blade roller configurations.
- Direct OEM Replacement: — Drops into the existing fastener location with the correct hex key drive size, allowing straightforward installation without sourcing adapters or alternate tooling.
- Prevents Loosening-Related Damage: — A worn, missing, or incorrect cap screw in a roller assembly can allow components to shift under load, leading to accelerated wear on mating parts and potential structural failure.
An Allen head cap screw — also called a socket head cap screw — uses an internal hex drive to allow high torque application in tight or recessed locations where a standard wrench cannot reach. In roller equipment, these fasteners are commonly used to secure covers, brackets, eccentric shaft housings, and other structural assemblies that must remain firmly located under continuous vibration. When a cap screw of the wrong length or thread specification is installed, it may not achieve the clamping force needed, allowing parts to loosen over time and causing wear or misalignment in the surrounding assembly. Using the correct OEM-spec fastener like the Multiquip 54192 ensures the joint holds to its designed load rating throughout the service life of the machine.
For questions about fitment or to confirm compatibility with your specific roller serial number, contact the DHS Equipment parts team directly.
Part Details
| Part Number | 54192 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Allen Head Cap Screw M4x30 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rollers | RW1404MR S/N 326075 and up |
| Rollers | RW1504HF up to S/N 1534188 |
| Rollers | RW1404MR |
| Rollers | P33/24 HHMR-BD w/Blade |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
