The Multiquip 55036 is a genuine OEM Hex Bolt 8x70 DIN 931 RW-60 designed for RW1810 and RW3010 RAMMAX walk-behind rollers. As a factory-sourced fastener, it meets the exact dimensional and material standards specified for these machines, ensuring a secure, properly torqued connection every time. Sourced directly through Multiquip's authorized parts network, the 55036 is the correct replacement when restoring your roller to full operating condition. Confirm your model number against the RW1810 and RW3010 fitment before ordering to ensure compatibility.
Key Features
- DIN 931 Standard Compliance — Manufactured to the internationally recognized DIN 931 hex bolt specification, ensuring correct thread form, shank length, and head geometry for the intended fastener position.
- Genuine OEM Sourcing — Produced to Multiquip's exact material and hardness grade requirements for the RW-60 application, so the bolt performs as the original engineers intended under compaction loads and vibration.
- Correct M8 x 70mm Dimensions — The 8x70 sizing matches the precise thread diameter and grip length needed for direct installation without modification to mating hardware or mounting surfaces.
- RAMMAX Roller Fitment — Verified for use on RW1810 and RW3010 walk-behind vibratory rollers, keeping your machine's structural and mechanical connections intact during operation.
- Vibration-Resistant Fastening — In roller applications, fastener loosening under sustained vibration is a primary failure mode; using the correctly graded OEM bolt maintains clamp force and connection integrity over extended service cycles.
A hex bolt in a vibratory roller application does far more than hold two components together — it maintains the structural integrity of assemblies that are subjected to continuous vibration, compaction forces, and outdoor environmental stress. The Multiquip 55036 Hex Bolt 8x70 DIN 931 RW-60 is dimensioned and graded specifically for its position on the RW1810 and RW3010, where an incorrect or undersized fastener can back out, strip, or fail under load. Replacing a worn or damaged bolt with the correct OEM part restores proper clamp load and prevents secondary damage to the components it secures.
For fitment questions or to verify this part against your serial number, contact the DHS Equipment parts team for assistance.
Part Details
| Part Number | 55036 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Hex Bolt 8x70 DIN 931 RW-60 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Rollers | RW1810 |
| Rollers | RW3010 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
