The Multiquip 952404470 is a genuine OEM Flat Washer M6 designed for a wide range of Multiquip equipment including MVH and MVC plate compactors, MTX and MTR rammers, RW and MRH rollers, DLW and GAW welders, GAC and DA generators, and ST submersible pumps. As a genuine OEM component, 952404470 is manufactured to the same specification as the original hardware installed at the factory, ensuring correct load distribution and a proper fit on first install. Compatible models include MVH508DE, MVH508GV, MVH408GV, MVC88VTHW, MVC88VTH, MVCi60, MTX-i60, MTR40HF, MT60H2, MRH800GS, MRH601DS, RW1404, RW1504HF, RW3010, DLW500ESA4, DLW400ESA4, GAW180HE, GAC6HR, GAC9.7HEA, DA7000SSA2, and ST2010, among others. Sourced directly through an authorized Multiquip parts distributor, DHS Equipment stocks 952404470 to keep your equipment back in service without delay.
Key Features
- Genuine OEM Hardware Grade — Manufactured to Multiquip's original material and dimensional specification, ensuring correct clamp load and surface bearing area for M6 fastener assemblies.
- Drop-In M6 Fit — Sized and finished to seat correctly under M6 bolt heads and nuts without shimming or modification, maintaining proper torque retention across the joint.
- Broad Cross-Family Compatibility — Fits MVH and MVC plate compactors, MTX and MTR rammers, RW and MRH rollers, GAW and DLW welders, GAC and DA generators, and ST submersible pump models.
- Protects Mating Surfaces — Distributes fastener load across a wider surface area, preventing pull-through or surface damage on sheet metal, housings, and structural components during assembly and in-service vibration.
- Vibration-Environment Rated — Suited to the high-vibration operating conditions common to compaction and demolition equipment, where fastener hardware is subjected to repeated dynamic loading.
A flat washer serves as a load-distributing interface between a fastener — bolt, nut, or screw — and the surface it bears against. By spreading clamping force across a larger contact area, the washer prevents the fastener head or nut from pulling through or damaging softer materials and protects threaded connections from loosening under vibration. On equipment like plate compactors, rammers, and rollers that operate under continuous vibration and shock loading, correctly specified hardware is essential; an undersized or worn washer can allow fasteners to work loose, leading to misalignment, component damage, or structural failure over time. Replacing worn or missing flat washers with the correct OEM part maintains joint integrity and keeps critical assemblies securely fastened through demanding daily use.
Part Details
| Part Number | 952404470 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Flat Washer M6 |
Compatibility & Fitment
| Name | Model |
|---|---|
| Plate Compactors | MVH508DE |
| Plate Compactors | MVH508GV |
| Plate Compactors | MVH408GV |
| Rollers | MRH800GS |
| Rammers | MT-E55 |
| Welders | DLW500ESA4 |
| Plate Compactors | MVH308DZ |
| Plate Compactors | MVH408DE |
| Plate Compactors | MVH308DE |
| Plate Compactors | MVH408DZ |
| Welders | DLW400ESA4 |
| Gasoline Powered Generators | GAC6HRS |
| Gasoline Powered Generators | GAC6HR |
| Gasoline Powered Generators | GAC3.6HR |
| Plate Compactors | MVC88VTHW |
| Plate Compactors | MVC88VTH |
| Plate Compactors | MVH158GH |
| Plate Compactors | MVH508DZ |
| Plate Compactors | MVCi60 |
| Rammers | MTX-i60 |
| Plate Compactors | MVH508GH |
| Plate Compactors | MVHeR60 |
| Plate Compactors | MVH208GH |
| Plate Compactors | MVH408GH |
| Plate Compactors | MVH308GH |
| Rammers | MTR40HF |
| Welders | GAW180HE1 |
| Welders | GAW180HEA |
| Welders | GAW180HE |
| Welders | DLW330X2 |
| Gasoline Powered Generators | GAC9.7HEA |
| Gasoline Powered Generators | GA-9.7HEA |
| Diesel Powered Generators | DA7000SSA2GH |
| Diesel Powered Generators | DA7000SSA2 |
| Rollers | MRH601DS |
| Submersible Pumps | ST2010 |
| Rollers | RW1404MR |
| Rollers | RW1404 |
| Rollers | RW1504HF up to S/N 1534188 |
| Rollers | RW1403HF |
| Rollers | RW3010 |
| Rollers | RW1404MR S/N 326075 and up |
| Rammers | MT60H2 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
