The Multiquip EE2917 Starter Solenoid Relay 24V is a genuine OEM component designed for SG1400C3-55748, SG1400C4F, and SG1600C4F series generators. Sourced directly from Multiquip, this relay meets the original 24-volt electrical specification required for dependable engine starting on diesel-powered studio and containerized generator sets. Verified fitment across the SG-series lineup means this is the correct part for your machine — no guesswork required.
Key Features
- Correct 24V Rating: — Matched to the 24-volt starting circuit specification of the SG-series generator, ensuring proper current draw and switching performance at every start cycle.
- Genuine OEM Component: — Manufactured to Multiquip's original design tolerances for the EE2917, delivering the same electrical switching reliability as the factory-installed unit.
- Direct-Connect Replacement: — Designed to plug into the existing wiring harness of compatible SG-series generators without modification to terminals or mounting hardware.
- SG-Series Generator Fitment: — Confirmed compatible with SG1400C3-55748, SG1400C4F, and SG1600C4F diesel-powered generator models.
- Starting System Integrity: — A worn or failed starter solenoid relay can cause intermittent starting, total no-crank conditions, or relay chatter — replacing with the correct OEM unit restores full starting system function.
- Electrical Safety Compliance: — As a switching component in the high-current starting circuit, using the correctly rated OEM relay is critical to preventing wiring damage, fuse failures, or uncontrolled starter engagement.
The starter solenoid relay acts as an electrically controlled switch between the generator's battery and the starter motor. When the operator initiates a start, a low-current signal from the ignition circuit energizes the relay coil, which closes a heavy-duty internal contact to send full battery current to the starter motor. If this relay fails — whether through coil burnout, contact corrosion, or mechanical fatigue — the starter motor will not receive power, leaving the generator unable to start. On 24-volt systems like those found in the SG-series, it is especially important that the replacement relay is rated for the correct voltage to ensure reliable coil engagement and adequate contact capacity under load.
Fits: SG1400C3-55748 | SG1400C4F | SG1600C4F
Need help confirming this is the right part for your generator? Contact DHS Equipment — our team is ready to verify fitment by model and serial number before you order.
Part Details
| Part Number | EE2917 |
|---|---|
| Brand | Multiquip |
| Part Type | Genuine OEM |
| Description | Starter Solenoid Relay 24V |
Compatibility & Fitment
| Name | Model |
|---|---|
| Diesel Powered Generators | SG1400C3-55748 |
| Diesel Powered Generators | SG1400C4F |
| Diesel Powered Generators | SG1600C4F |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
