The Genie 1283005GT is a genuine OEM Nylock Flange Nut, 10-32, A, ZAG built for a wide range of Genie equipment including GS scissor lifts, S and SX telescopic boom lifts, Z articulating boom lifts, and GTH telehandlers. As a factory-sourced fastener, this nut delivers the exact thread specification, flange geometry, and zinc-alloy finish required for correct installation on Genie machines. Cross-reference part number 1283005GT against your machine's parts manual to confirm it is the right fastener for your specific unit and application. DHS Equipment stocks genuine Genie OEM parts so you can get the correct component without delay.
Key Features
- Genuine OEM Specification — Manufactured to Genie's exact dimensional and material standards, including the correct 10-32 thread pitch, flange profile, and ZAG zinc-alloy finish for corrosion resistance in outdoor and variable-weather environments.
- Nylon Insert Locking — The nylock insert resists vibration-induced loosening, helping fastened assemblies stay secure through the operational stresses of aerial lift and telehandler use.
- Flange Design for Load Distribution — The integrated flange spreads clamping load across a wider bearing surface, reducing the risk of surface damage or pull-through on the mating component.
- Broad Genie Equipment Compatibility — Fits GS scissor lifts, S and SX telescopic booms, Z and TZ articulating booms, and GTH telehandlers, making this a commonly stocked fastener across multiple Genie equipment families.
- Direct OEM Replacement — Threads and dimensions match the original fastener exactly, so installation requires no modification to mating hardware or surrounding components.
A nylock flange nut combines two functions in a single fastener: the integrated flange acts as a built-in washer to distribute clamping load, while the nylon insert deforms around the bolt threads to resist backing off under vibration and cyclical movement. On aerial lifts and telehandlers, where structural and mechanical joints are subject to constant motion and load shifts, a fastener that maintains its clamping force is essential to the integrity of the assembled joint. A nut that has stripped threads, a compromised nylon insert, or incorrect thread specification should be replaced with the correct OEM part to ensure the joint performs as designed.
Part Details
| Part Number | 1283005GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Nylock Flange Nut, 10-32, A, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| SX-150 | SX-150 |
| S-60 XC | S-60 XC |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-135 XC | SX-135 XC |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| SX-125 XC | SX-125 XC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1330m | GS-1330m |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-1332m | GS-1332m |
| GS-1432m | GS-1432m |
| GS-1932m | GS-1932m |
| GS-1932 | GS-1932 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4046 | GS-4046 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TZ-50/30 | TZ-50/30 |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-51/30J | Z-51/30J |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
