The Genie 1274167GT is a genuine OEM Nylock Flange Nut, 5/16-18, Female, Zinc-Coated built for a wide range of Genie aerial equipment, including S and SX telescopic boom lifts, GS scissor lifts, Z and ZX articulating boom lifts, and GTH telehandlers. As a genuine OEM part, it is manufactured to the exact material and dimensional standards Genie specifies for this application. Cross-reference part number 1274167GT against your machine's parts manual to confirm it is the correct fastener for your unit before ordering.
Key Features
- Zinc-Coated for Corrosion Resistance — The zinc-coated (ZAG) finish provides a protective barrier against rust and corrosion, extending service life in outdoor and demanding jobsite environments.
- Nylon-Insert Locking Flange Design — The integrated flange distributes clamping load evenly across the mating surface, while the nylon insert resists loosening from vibration — critical on mobile aerial equipment.
- Exact OEM Thread Specification — Cut to a 5/16-18 thread specification, this nut installs directly in place of the original fastener with no rework or modification to the joint.
- Broad Genie Fitment — Fits Genie S and SX telescopic booms, Z and ZX articulating booms, GS scissor lifts, GTH telehandlers, and select TZ trailer-mounted booms, making it a practical stock item for mixed Genie fleets.
- Genuine OEM Assurance — Sourced directly from Genie, this fastener meets the torque and clamp-load requirements the machine was engineered around — not approximated to a generic hardware equivalent.
A Nylock flange nut combines two locking features in a single fastener: a wide bearing flange that replaces a separate washer and spreads load across the joint surface, and a nylon collar insert that deforms around the thread to resist loosening under vibration and dynamic loads. On mobile aerial equipment, where constant movement and variable loads work against standard fasteners, the locking action of the nylon insert is essential for keeping joints secure between service intervals. A missing, stripped, or incorrect nut can allow a joint to work loose, leading to play in the assembly and potential structural or mechanical issues. Replacing a worn or damaged fastener with the correct OEM specification part restores the integrity of the connection.
Part Details
| Part Number | 1274167GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Nylock Flange Nut, 5/16-18, Female, Zinc-Coated |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| SX-150 | SX-150 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4047 | GS-4047 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1330m | GS-1330m |
| GS-4655 | GS-4655 |
| GS-1332m | GS-1332m |
| GS-1432m | GS-1432m |
| GS-1932m | GS-1932m |
| GS-1932 | GS-1932 |
| GS-4046 | GS-4046 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TZ-34/20 | TZ-34/20 |
| TZ-50/30 | TZ-50/30 |
| Z-60/34 | Z-60/34 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 N | Z-34/22 N |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
