The Genie T107520GT is a genuine OEM LP Knurled Nutsert, 1/4-20x.165 built for Genie S series telescopic boom lifts and Z series articulating boom lifts. As a direct OEM replacement, this fastener is manufactured to the same specifications as the original, ensuring a correct fit in every application it was designed for. Compatible models include the S-60, S-65, S-60 XC, S-60 TRAX, S-65 TRAX, Z-45/25, Z-45/25J IC Power, Z-45 XC, Z-51/30J, Z-62/40, Z-60/37 DC, Z-60/37 FE Hybrid, Z-60 DC, Z-60 FE Hybrid, Z-60 FE, and more. Cross-reference T107520GT against your machine's parts manual to confirm this is the correct fastener for your specific unit.
Key Features
- Genuine OEM Quality — Manufactured to Genie's original dimensional and material specifications, this nutsert delivers the same knurl engagement and thread integrity as the part it replaces.
- Exact 1/4-20 Thread Specification — The 1/4-20x.165 thread profile installs directly into its designed hole without modification, maintaining consistent clamping force and thread engagement.
- Broad Boom Lift Compatibility — Fits a wide range of Genie S series telescopic and Z series articulating boom lifts, including XC, TRAX, DC, FE Hybrid, and IC Power variants.
- Secure Fastening in Structural Applications — A knurled nutsert creates a permanent threaded insert in sheet metal or thin material, resisting rotation and pull-out under the vibration and load cycles typical of aerial work platforms.
- Low-Profile Design — The LP (low-profile) flange sits flush or near-flush against the mating surface, making it suitable for locations where a standard flange nutsert would interfere with adjacent components.
A nutsert — also called a rivet nut or blind nut — is a fastening insert pressed or swaged into a pre-drilled hole to create a threaded anchor point in material that is too thin to tap directly. The knurled outer surface bites into the host material as the nutsert is installed, preventing it from spinning under torque. On Genie boom lifts, these inserts are used throughout the structure and panel assemblies wherever a reliable threaded connection is required on one-sided access points. A loose, stripped, or missing nutsert compromises the integrity of its bolted joint, which can allow panels or components to shift — making timely replacement with the correct OEM part important for keeping the machine properly assembled.
Part Details
| Part Number | T107520GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | LP Knurled Nutsert, 1/4-20x.165 |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
