The Genie 49612GT is a genuine OEM O-Ring Kit (ORFS Fittings) designed for a broad range of Genie aerial lifts, telehandlers, and light towers. Sourced directly from Genie, this kit ensures every O-ring in the set meets the exact material grade and dimensional tolerances required by the original hydraulic system design. Cross-reference part number 49612GT against your parts manual to confirm fitment — this kit covers GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GTH telehandlers, TZ and TMZ trailer-mounted booms, GR and QS vertical mast lifts, AWP and IWP personnel lifts, and AL and RL light towers. Keeping this kit on hand means any ORFS fitting service can be completed in a single pass without waiting on individual ring orders.
Key Features
- Genuine OEM Sealing Material — Each O-ring is manufactured to the compound grade and durometer rating specified for Genie hydraulic ORFS fittings, delivering the compression seal the system was engineered around.
- Direct-Swap Installation — Rings seat into ORFS fitting grooves without modification, restoring a leak-free connection at the fitting face as soon as the fitting is torqued.
- Wide Fleet Coverage — A single kit services GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, GTH telehandlers, TZ and TMZ trailer-mounted booms, GR and QS mast lifts, AWP and IWP personnel lifts, and AL and RL light towers.
- Hydraulic Integrity Restored — Worn or cracked O-rings at ORFS fittings allow hydraulic fluid to escape under pressure, causing slow or erratic lift function and potential fluid loss. A fresh set restores rated system pressure and consistent cylinder response.
- Safety-Critical Seal Point — On aerial lifts and telehandlers, hydraulic pressure loss at a fitting O-ring can affect platform elevation, boom extension, and load control. Using the correct OEM-spec rings at every service interval supports the hydraulic containment the machine's safety systems depend on.
O-Face RFace Seal (ORFS) fittings use a flat sealing face and a seated O-ring to create a positive, vibration-resistant hydraulic connection — a design that eliminates thread-face leakage common in older fitting standards. The O-ring in each fitting is the sole sealing element, so when it degrades from heat cycling, fluid exposure, or age, the fitting will weep or leak under pressure even if the fitting itself is undamaged. Replacing the O-rings with correctly sized, OEM-compound rings restores full sealing integrity and prevents the fluid loss and pressure drop that would otherwise lead to sluggish or unreliable lift, boom, or drive function across the machine.
Part Details
| Part Number | 49612GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | O-Ring Kit (ORFS Fittings) |
Compatibility & Fitment
| Name | Model |
|---|---|
| AL5 with Vertical Mast | AL5 with Vertical Mast |
| RL4 Vertical Mast | RL4 Vertical Mast |
| RL4 LED Vertical Mast | RL4 LED Vertical Mast |
| AL4 | AL4 |
| AL5 | AL5 |
| GRC-12 | GRC-12 |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| IWP Super Series | IWP Super Series |
| AWP Super Series | AWP Super Series |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GR-8 | GR-8 |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-4047 | GS-4047 |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-2646 AV | GS-2646 AV |
| GS-2646 AV35 | GS-2646 AV35 |
| GS-2668 RT | GS-2668 RT |
| GS-3268 RT | GS-3268 RT |
| GS-2668 DC | GS-2668 DC |
| GS-3268 DC | GS-3268 DC |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TZ-34/20 | TZ-34/20 |
| TZ-50/30 | TZ-50/30 |
| TZ-50 | TZ-50 |
| TMZ-34/19 | TMZ-34/19 |
| TMZ-50/30 | TMZ-50/30 |
| TMZ-17/10 | TMZ-17/10 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-34/22 IC | Z-34/22 IC |
| Z-45 XC | Z-45 XC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
