The Genie 32150GT is a genuine OEM Genie Blue Wet Paint, supplied in a 1-gallon container, built for a wide range of Genie equipment including GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GTH telehandlers, TZ and TMZ trailer-mounted booms, light towers, and personnel and material lifts. As a genuine Genie OEM product, this paint is matched to the factory color used on Genie machines, so touch-ups and refinishes blend accurately with the original finish. Confirm part number 32150GT against your machine's parts manual to ensure this is the correct paint specification for your unit.
Key Features
- Matched Factory Color — Formulated to the exact Genie Blue used on Genie equipment at the factory, so touch-ups and panel refinishes match the original finish without visible color variation.
- Genuine OEM Product — Sourced directly from Genie, ensuring the pigment, sheen, and adhesion properties meet the same standards as the original production finish applied to your machine.
- One-Gallon Coverage — A full gallon provides sufficient volume for larger touch-up areas, structural component refinishing, or fleet maintenance across multiple units.
- Broad Equipment Compatibility — Compatible with Genie GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, GTH telehandlers, light towers, and personnel and material lift lines.
- Corrosion and Wear Protection — A sound paint finish protects structural surfaces and sheet metal from moisture and surface corrosion; a chipped or bare surface left uncoated can allow rust to develop in exposed areas.
Paint is a protective and identification coating applied to structural components, covers, and sheet-metal surfaces on Genie machines. A properly applied finish seals the base material from moisture, minor abrasion, and environmental exposure that can lead to surface corrosion over time. When a finish chips, scratches, or wears through in high-contact areas, the underlying material is left exposed; refinishing with the correct color-matched paint restores both the protective layer and the machine's appearance. Using the correct Genie Blue formulation ensures the repaired area matches the surrounding original finish rather than standing out as an obvious repair.
Part Details
| Part Number | 32150GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Wet Paint, Genie Blue, 1 Gallon |
Compatibility & Fitment
| Name | Models |
|---|---|
| AL4 | AL4 |
| AL5 | AL5 |
| AL5 with Vertical Mast | AL5 with Vertical Mast |
| AWP Super Series | AWP Super Series |
| CWP Super Series | CWP Super Series |
| GS-1330m | GS-1330m |
| GS-1530 | GS-1530 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-4047 | GS-4047 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| IWP | IWP |
| IWP Super Series | IWP Super Series |
| Load Lifter | Load Lifter |
| RL4 LED Vertical Mast | RL4 LED Vertical Mast |
| RL4 Vertical Mast | RL4 Vertical Mast |
| S-45 XC | S-45 XC |
| S-60 | S-60 |
| S-60 J | S-60 J |
| S-65 | S-65 |
| S-65 XC | S-65 XC |
| S-80 J | S-80 J |
| S-85 XC | S-85 XC |
| Superlift Advantage | Superlift Advantage |
| Superlift Contractor | Superlift Contractor |
| SX-125 XC | SX-125 XC |
| SX-135 XC | SX-135 XC |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| TML-4000N | TML-4000N |
| TMZ-34/19 | TMZ-34/19 |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| TZ-50/30 | TZ-50/30 |
| Z-30/20 | Z-30/20 |
| Z-30/20 N | Z-30/20 N |
| Z-33 DC Power | Z-33 DC Power |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 N | Z-34/22 N |
| Z-45 XC | Z-45 XC |
| Z-45/22 | Z-45/22 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
