The Genie 214622GT is a genuine OEM Boot Plug, 3P, 30A, 4 Wire designed for Genie S-series telescopic boom lifts and Z-series articulating boom lifts. As a direct OEM replacement sourced from Genie, this plug is built to the same specification as the original part installed at the factory. It is confirmed compatible across a wide range of S and Z series models, including the S-40, S-45, S-60, S-65, S-80, S-85, and their XC, TRAX, HF, and HC variants, as well as the Z-60/34, Z-62/40, and Z-45 XC. Always cross-reference part number 214622GT against your machine's parts manual to confirm fitment for your specific unit before ordering.
Key Features
- Genuine OEM Construction — Manufactured to Genie's original material and dimensional specifications, ensuring the plug seats and seals correctly in its connector housing without adaptation.
- Correct Electrical Rating — Rated at 30A across 4 wires in a 3-position configuration, matching the original connector spec for the circuit it serves.
- Direct OEM Replacement — Installs in place of the original component with no modification; the connector profile and boot dimensions match the mating housing exactly.
- Broad Model Coverage — Fits a wide range of Genie S-series telescopic and Z-series articulating boom lifts, including XC, TRAX, HF, and HC variants.
- Protects the Connection Point — The boot component shields the connector from moisture, debris, and mechanical wear, preserving a clean and secure electrical connection over time.
- Electrical Integrity — A damaged or missing boot plug leaves the connector exposed to contamination that can cause intermittent faults or connection failure; replacing it promptly keeps the circuit operating as intended.
A boot plug seals and protects an electrical connector at the point where wiring enters or exits the connector housing. The boot portion acts as a barrier against moisture, dust, and physical abrasion, while the plug body locks the assembly together and maintains proper pin alignment. When a boot plug cracks, tears, or goes missing, the connector behind it is left exposed to the elements — contamination can work into the terminal contacts, causing resistance, intermittent faults, or a dead circuit. Replacing a worn boot plug with the correct OEM part restores the protection the connector was designed to have and helps prevent more costly electrical repairs down the line.
Part Details
| Part Number | 214622GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Boot Plug, 3P, 30A, 4 Wire |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| Z-60/34 | Z-60/34 |
| Z-62/40 | Z-62/40 |
| Z-45 XC | Z-45 XC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
