The Wacker Neuson is a genuine OEM Push-In Plug designed for PT2H and PT3H series self-priming centrifugal trash pumps and a wide range of DPU and DPS reversible vibratory plate compactors. As a factory-authorized replacement part, the is produced to the same specifications as the original component installed at the time of manufacture. This plug fits an extensive lineup of Wacker Neuson equipment — including the DPU 2440H, DPU 2540H, DPU 3050H, DPU 3060H, DPU 3070H, DPU 3750Hts, DPS1850H, DPS3060Hv, and related TS and HE variants — making it a versatile service item to keep on the shelf.
Key Features
- Genuine OEM Sealing Integrity — Manufactured to Wacker Neuson's original material and dimensional tolerances, ensuring the plug seats and retains its seal correctly in the port or cavity it closes off.
- Direct Push-In Installation — Designed to snap or press into place without additional hardware, allowing for fast, tool-free service during routine maintenance or repair.
- Broad Cross-Family Fitment — A single part number covers PT2H and PT3H trash pumps alongside the DPU 2440H through DPU 3760H and DPS1850H through DPS3060Hv plate compactor series, simplifying parts inventory across mixed fleets.
- Maintains Fluid or Debris Exclusion — A correctly seated push-in plug keeps ports sealed against contaminants, moisture, and fluid migration; a missing or damaged plug can expose internal passages to dirt ingestion or unwanted fluid loss.
- Verified Part Number Traceability — Sourced directly from Wacker Neuson, part number 5000151233 is traceable to the original equipment bill of materials for the models listed, giving you confidence before you order.
A push-in plug is a small but critical sealing component used to close off an unused port, passage, or cavity within a machine's housing, fluid circuit, or structural casting. It prevents contaminants such as dirt, water, and debris from entering internal systems, and stops fluids from leaking out through openings that are not in active use. When a push-in plug is missing, cracked, or dislodged, exposed ports can admit abrasive particles into hydraulic or lubrication passages, or allow fluid to escape — both of which can accelerate internal wear and lead to broader component failure if left unaddressed.
Part Details
| Part Number | 5000151233 |
|---|---|
| Old Part Number | 0151233 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Push-In Plug |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
