The Genie 25388GT is a genuine OEM Fused Plug, 250V, 13 Amp, U.K. designed for a wide range of Genie aerial work platforms and vertical mast lifts sold and operated in the United Kingdom and other markets using BS 1363-style outlets. This plug is the correct OEM-specified connector for Genie GS scissor lifts, S-series telescopic boom lifts, Z and ZX articulating boom lifts, and Genie push-around and vertical mast lifts including the AWP Super Series, IWP Super Series, QS, and GR lines. Sourced directly from Genie, this component matches the exact voltage and amperage rating called out in the original parts manual, ensuring your machine's charging or power-supply circuit operates as intended. Cross-reference part number 25388GT against your machine's parts manual to confirm application before ordering.
Key Features
- Correct Voltage and Amperage Rating — Rated at 250V, 13 Amp to match the UK-market power-supply specification Genie engineers into these machines, keeping the electrical circuit within its designed operating parameters.
- Genuine OEM Component — Supplied as an original Genie part, this plug carries the same fuse protection grade and pin configuration as the unit installed at the factory, so there is no guesswork on specification.
- Broad Fleet Coverage — Fits Genie GS scissor lifts, S-series and Z/ZX-series boom lifts, TZ trailer-mounted booms, and push-around mast lifts including the AWP Super Series, IWP Super Series, QS, and GR lines — one part number covering a large mixed fleet.
- Direct Plug-In Replacement — The BS 1363-compatible body and blade configuration install directly in place of the original, requiring only the standard fused-plug change procedure.
- Fuse Protection Built In — The integrated fuse element guards downstream wiring and charging components against overcurrent events, protecting circuits that can be costly to diagnose and repair if an unprotected plug is substituted.
- Electrical Safety Compliance — For aerial work platforms operating under UK site safety regulations, using the correct rated and fused plug is essential to maintaining compliance with electrical equipment standards on the jobsite.
The fused plug is the point at which a Genie machine's onboard charger or auxiliary power circuit connects to a mains wall outlet. On UK-specification machines, this must be a BS 1363-type plug fitted with the correct amp fuse — in this case 13 Amp — to match the rated current draw of the charger or power inlet. When this plug is damaged, its fuse blown, or replaced with an incorrectly rated substitute, the machine may fail to charge or operate from mains power, and in the case of an undersized fuse, nuisance tripping can interrupt operation. Using the correct OEM-specified fused plug restores the intended electrical connection and keeps the circuit's overcurrent protection in line with Genie's design intent.
Part Details
| Part Number | 25388GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Fused Plug, 250V, 13 Amp, U.K. |
Compatibility & Fitment
| Name | Model |
|---|---|
| AWP Super Series | AWP Super Series |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| IWP Super Series | IWP Super Series |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GRC-12 | GRC-12 |
| AWP Super | AWP Super |
| GR-8 | GR-8 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 | S-80 |
| S-85 | S-85 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-4047 | GS-4047 |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-1330m | GS-1330m |
| GS-4655 | GS-4655 |
| GS-4046 | GS-4046 |
| GS-1332m | GS-1332m |
| GS-1432m | GS-1432m |
| GS-1932m | GS-1932m |
| GS-2668 RT | GS-2668 RT |
| GS-3268 RT | GS-3268 RT |
| GS-2668 DC | GS-2668 DC |
| GS-3268 DC | GS-3268 DC |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z33/18 | Z33/18 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-45/25 IC | Z-45/25 IC |
| Z-33 DC Power | Z-33 DC Power |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-45/22 | Z-45/22 |
| Z-25/8 | Z-25/8 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
