The Genie 78098GT is a genuine OEM 24VDC, 40/30A Sealed Relay with Bracket designed for a wide range of Genie scissor lifts, boom lifts, vertical mast lifts, and QuickStock mast lifts. As a direct OEM replacement, this relay matches the original component's electrical ratings and mounting configuration, ensuring the circuit it serves operates exactly as Genie intended. This part fits GS scissor lifts, GR and GRC Runabout lifts, QS mast lifts, S-series telescopic booms, Z-series and TZ-series articulating booms, and TMZ trailer-mounted booms — cross-reference part number 78098GT against your machine's parts manual to confirm it is the correct relay for your specific unit.
Key Features
- Correct Electrical Rating — Rated at 24VDC with 40/30A switching capacity, matching the original relay specification so the circuit operates within its designed parameters.
- Integrated Mounting Bracket — The sealed relay ships complete with its bracket, dropping into the original mounting position without additional hardware or fabrication.
- Genuine OEM Part — Sourced directly from Genie, this component meets the same manufacturing standards as the relay installed at the factory.
- Broad Cross-Family Fitment — Fits multiple Genie equipment families including GS scissor lifts, GR and GRC Runabout lifts, QS stock-picking mast lifts, S-series telescopic booms, and Z-series articulating booms.
- Sealed Construction for Durability — The sealed relay body resists moisture and contamination, helping it hold up in the demanding environments where this equipment operates.
- Operational Safety — Relays are switching components that control powered machine functions. A faulty relay can cause erratic operation or prevent critical functions from engaging — replacing a failed relay with the correct OEM part restores predictable, safe machine behavior.
A relay is an electrically operated switch that allows a low-current control signal to open or close a higher-current circuit, enabling the machine's control system to activate motors, solenoids, and other powered components without routing full load current through the operator controls. On Genie equipment, relays like this 24VDC, 40/30A unit manage the switching of significant electrical loads across drive, lift, and accessory circuits. When a relay fails — whether through contact wear, coil burnout, or corrosion — the function it controls may become intermittent or stop responding entirely. Replacing the relay with the correct Genie OEM component restores proper switching behavior and keeps the machine's electrical system operating as designed.
Part Details
| Part Number | 78098GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Relay, 24VDC, 40/30A, Sealed with Bracket |
Compatibility & Fitment
| Name | Model |
|---|---|
| GRC-12 | GRC-12 |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| GR-8 | GR-8 |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| GS-1330m | GS-1330m |
| GS-4655 | GS-4655 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2668 DC | GS-2668 DC |
| GS-3268 DC | GS-3268 DC |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-3232 | GS-3232 |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| TMZ-50/30 | TMZ-50/30 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z33/18 | Z33/18 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-34/22 IC | Z-34/22 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
