The Wacker Neuson is a genuine OEM Retaining Ring designed for a broad range of Wacker Neuson trash pumps and portable generators, including the PTS4V, PT2V, PT3V, GPS9700, GPS8500, GS8.5V, GS9.7V, and WP1550V and VPG165V vibratory plate compactors. As a factory-sourced component, this retaining ring matches the exact geometry and material grade specified by Wacker Neuson for these applications. Verified fitment across multiple machine families makes part number a dependable choice whether you're servicing a centrifugal trash pump or a portable generator.
Key Features
- Genuine OEM Retention Integrity — Manufactured to Wacker Neuson's original material and dimensional specification, ensuring the ring seats and retains components with the correct holding force for each application.
- Drop-In Installation — Matches the groove profile of the original retaining ring, so it installs directly into the existing snap groove without machining or modification to the bore or shaft.
- Wide Cross-Family Fitment — Confirmed for PTS4V and PT2V/PT3V centrifugal trash pumps, GPS9700, GPS8500, GS8.5V, and GS9.7V portable generators, and WP1550V and VPG165V vibratory plates.
- Prevents Component Migration — A correctly seated retaining ring locks bearings, shafts, or rotating assemblies in their designed axial position; a worn or missing ring allows movement that accelerates wear on surrounding components.
- OEM Sourced for Long Service Life — Genuine Wacker Neuson parts are produced from the same material stock and to the same tolerances as the original build, extending the effective service interval between replacements.
A retaining ring — also called a snap ring or circlip — is a fastening device that seats into a machined groove on a shaft or inside a bore to hold an assembly in its correct axial position. In trash pumps and generators, retaining rings are typically used to secure bearings, impellers, or rotating shaft components against lateral movement caused by vibration and load cycles. When a retaining ring cracks, deforms, or loses its tension, the parts it secures can shift out of alignment, causing accelerated bearing wear, increased vibration, and in some cases catastrophic component damage if the fault goes uncorrected. Replacing a worn or damaged retaining ring promptly with a properly spec'd OEM part restores the integrity of the assembly and protects the surrounding components.
Part Details
| Part Number | 5000110874 |
|---|---|
| Old Part Number | 0110874 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Retaining Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 100mm/4in Centrifugal Trash Pu mp | PTS4V | 5000007691, 5000007683 |
| Portable Generator with Electr ic Start | GPS9700 | 5000008287, 5000620264 |
| Portable Generator with Electr ic Start | GPS8500 | 5000008286 |
| Portable Generator with Electr ic Start | GS8.5V | 5000007661 |
| Portable Generator with Electr ic Start | GS9.7V | 5000007662 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550VW | 5000007577 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550V | 5000007580 |
| Vibratory Plate 587mm/18in | VPG165V | 5000007554 |
| 50mm/2in Centrifugal Trash Pum p | PT2V | 5000009238, 5000009093, 5000009096 |
| 75mm/3in Centrifugal Trash Pum p | PT3V | 5000009102, 5000009241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
