The Genie 825020GT is a genuine OEM Rod End,.25 x 2.75, ZAG designed for a broad range of Genie aerial lifts and telehandlers, including GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GR vertical mast lifts, QS stock-picking lifts, and GTH telehandlers. As an authentic Genie OEM component, this rod end is manufactured to the same specification as the original part, ensuring a direct, confidence-inspiring fit. Cross-reference part number 825020GT against your machine's parts manual to confirm application before ordering. With coverage spanning such a wide range of Genie equipment, this single part number serves as a go-to solution across mixed fleets.
Key Features
- Genuine OEM Precision: — Manufactured to Genie's original dimensional and material specification for this rod end, maintaining the correct pivot geometry and load-bearing integrity the machine was designed around.
- Direct-Install Replacement: — Matches the original mounting thread, shank diameter (.25 in.), and overall length (2.75 in.) so this part drops into the linkage or cylinder assembly without rework.
- Broad Fleet Coverage: — Fits GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, GR and QS vertical mast lifts, TZ trailer-mounted booms, and GTH telehandlers — one part number serving a wide Genie fleet.
- Smooth, Low-Friction Articulation: — A correctly fitted rod end allows connected linkages and control arms to pivot freely and without binding, preserving responsive, smooth machine movement through the full range of motion.
- Operational Safety on Aerial Equipment: — Rod ends in boom and scissor linkages bear dynamic loads during elevation and extension. A worn or failed rod end can introduce unwanted play or loss of control in critical motion circuits, making timely replacement essential on aerial equipment.
A rod end — sometimes called a heim joint or clevis rod end — is a pivoting connector that links a hydraulic cylinder rod, control rod, or actuating arm to the structure or mechanism it moves. It allows the connected components to rotate or articulate smoothly through their intended arc without binding or side-loading the cylinder rod itself. Over time, the internal bearing or ball socket within the rod end can wear, corrode, or develop looseness, which introduces slop into the linkage, reduces control precision, and — on aerial lifts where controlled movement is critical — can affect safe, predictable platform operation. Replacing a worn rod end with a genuine OEM part restores the original pivot characteristics and keeps motion circuits functioning as engineered.
Part Details
| Part Number | 825020GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Rod End, .25 x 2.75, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GR-8 | GR-8 |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| S-40 | S-40 |
| S-45 | S-45 |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-4047 | GS-4047 |
| GS-1330m | GS-1330m |
| GS-4046 | GS-4046 |
| GS-1332m | GS-1332m |
| GS-1432m | GS-1432m |
| GS-1932m | GS-1932m |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| GTH-644 | GTH-644 |
| GTH-844 | GTH-844 |
| GTH-842 | GTH-842 |
| TZ-34/20 | TZ-34/20 |
| TZ-50/30 | TZ-50/30 |
| TZ-50 | TZ-50 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z33/18 | Z33/18 |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-80/60 | Z-80/60 |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-60 FE | Z-60 FE |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-30/20 | Z-30/20 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/22 | Z-45/22 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
