The Genie 824227GT Button Head Cap Screw is a genuine OEM fastener built for a wide range of Genie S series telescopic boom lifts, Z series articulating boom lifts, GS series scissor lifts, and GTH series telehandlers. As a direct OEM replacement, this screw is manufactured to the same dimensional and material standards as the original hardware installed at the factory. Cross-reference part number 824227GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- OEM-Grade Zinc-Aluminum Coated Finish — The ZAG (zinc-aluminum) coating provides corrosion resistance suited to the demanding outdoor environments where Genie equipment operates.
- Exact Thread and Dimensional Spec — 1/4-20 thread pitch and 1-inch length match the original fastener specification, ensuring the screw seats and torques correctly without alteration.
- Low-Profile Button Head Design — The button head cap (BHC) profile provides a smooth, low-clearance head where standard hex-head fasteners may foul surrounding components or panels.
- Broad Fitment Across Genie Equipment Families — A single genuine OEM part number serves S and Z series boom lifts, GS scissor lifts, and GTH telehandlers, making it a practical stocking item for mixed fleets.
- Structural Integrity at Every Installation Point — A fastener of the correct grade and geometry maintains clamping force over time; substituting an incorrect size or grade can allow joints to loosen under vibration and load cycles typical of aerial equipment.
A button head cap screw is a threaded fastener with a rounded, low-profile dome head and an internal hex drive, used to secure components where a flush or near-flush surface is needed. On Genie aerial lifts and telehandlers, fasteners like this one are found throughout the machine — securing covers, guards, brackets, and structural assemblies. When a screw is stripped, corroded, or missing, the joint it holds can work loose, compromising the integrity of the attached component. Replacing a worn or damaged screw with the correct OEM part restores the original clamping specification and keeps the assembly properly secured.
Part Details
| Part Number | 824227GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Button Head Cap Screw, 1/4-20 x 1, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-40 | S-40 |
| S-45 | S-45 |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-85 XC | S-85 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-1932 | GS-1932 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-60/34 | Z-60/34 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-60 DC | Z-60 DC |
| Z-60 FE | Z-60 FE |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
