The Genie 45425GT is a genuine OEM Flat Head Socket Screw, 3/8-16 x.75 built for a wide range of Genie vertical mast lifts, push-around personnel lifts, scissor lifts, and boom lifts, including GR-12, GR-15, and GR-20 Runabout lifts, AWP and IWP Super Series units, QS-series stock-picking lifts, DPL personnel lifts, the GS-3384 scissor lift, S-60 telescopic boom, and Z-series articulating booms. As a genuine OEM part, it is manufactured to the same specification as the original hardware installed at the factory. Cross-reference part number 45425GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- Genuine OEM Dimensional Conformity — Manufactured to the exact thread pitch, drive geometry, and head profile of the original 3/8-16 x .75 fastener, ensuring correct torque engagement and flush seating.
- Direct Hardware Replacement — Drops into the existing threaded bore without rework, matching the countersunk head angle and socket drive of the original fastener.
- Broad Genie Fitment — Compatible with multiple Genie equipment families including GR Runabout vertical mast lifts, AWP and IWP Super Series personnel lifts, QS stock-picking lifts, DPL units, GS scissor lifts, and S and Z series boom lifts.
- Structural Integrity — A correctly fastened joint keeps panels, guards, and structural components secured in place; a stripped or missing fastener can allow components to shift or separate during operation.
- Genuine Part Assurance — Sourced directly through Genie's OEM supply chain and sold by DHS Equipment, so you receive the correct part with confidence.
A flat head socket screw uses a countersunk, conical head that sits flush with or below the surface of the mated component when fully driven. The internal hex socket drive allows high torque to be applied in confined spaces where a standard wrench cannot reach. On Genie personnel lifts, scissor lifts, and boom lifts, fasteners of this type are used throughout the structure and enclosures to secure components without protruding edges that could create a snag or interference hazard. A fastener that is worn, corroded, or cross-threaded can no longer hold the clamping force the joint requires, making timely replacement with the correct OEM specification screw essential to keeping the machine properly assembled.
Part Details
| Part Number | 45425GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Head Socket Screw, 3/8-16 x .75 |
Compatibility & Fitment
| Name | Models |
|---|---|
| AWP Super | AWP Super |
| AWP Super Series | AWP Super Series |
| CWP Super Series | CWP Super Series |
| DPL-25S | DPL-25S |
| DPL-30S | DPL-30S |
| DPL-35S | DPL-35S |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GS-3384 | GS-3384 |
| IWP | IWP |
| IWP Super Series | IWP Super Series |
| QS-12R | QS-12R |
| QS-12W | QS-12W |
| QS-15R | QS-15R |
| QS-15W | QS-15W |
| QS-20R | QS-20R |
| QS-20W | QS-20W |
| S-60 | S-60 |
| Z-30/20 N | Z-30/20 N |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/22 | Z-45/22 |
| Z-45/22 MP | Z-45/22 MP |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Genie
Genie 27035GT Socket Head Cap Screw, 3/8-16 x .75, Black, for Rotator 94398GT
