The Genie 1256844GT Hex Head Cap Screw, 1/2-13x1.5 is a genuine OEM fastener built for a wide range of Genie equipment, including GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GTH telehandlers, TZ trailer-mounted booms, and RL light towers. As a genuine Genie part, this screw is manufactured to the exact grade and dimensional specification called out in the Genie parts manual, so it installs without guesswork. Cross-reference part number 1256844GT against your machine's parts diagram before ordering to confirm it is the correct fastener for your application.
Key Features
- Grade 8 Construction — Rated Grade 8 with a zinc-chromate (ZAG) coating for corrosion resistance, meeting the strength and surface-protection requirements specified for this application.
- Exact Dimensional Fit — Cut to 1/2-13 thread pitch and 1.5-inch length, matching the OEM specification so the screw seats and torques correctly on the first installation.
- Broad Genie Compatibility — Fits GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, TZ trailer-mounted booms, GTH telehandlers, and RL light towers across multiple configurations and variants.
- Genuine OEM Part — Supplied directly by Genie, this fastener carries the correct material grade and plating spec — not a generic hardware-store substitute that may vary in strength class or coating thickness.
- Structural Integrity — Using the correct grade and thread specification in every fastener location preserves the clamping load the joint was designed for, preventing loosening or fatigue failure at that connection point.
A hex head cap screw is a threaded fastener used to clamp two or more components together, tightened with a wrench or socket against a specified torque value. Grade 8 designates a high-strength classification, making this screw suitable for structurally demanding joint locations where a lower-grade fastener could stretch, loosen, or fail under load. The zinc-chromate coating resists rust and corrosion, which is especially important on equipment that operates outdoors or in wet conditions. Replacing a worn, stripped, or corroded fastener with the correct OEM-specification screw restores the clamping integrity the joint requires and prevents damage to mating threads or components.
Part Details
| Part Number | 1256844GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/2-13x1.5, 8, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| RL4 Vertical Mast | RL4 Vertical Mast |
| RL4 LED Vertical Mast | RL4 LED Vertical Mast |
| SX-135 XC | SX-135 XC |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-65 XC | S-65 XC |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-85 XC | S-85 XC |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-1330m | GS-1330m |
| GS-4655 | GS-4655 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4046 | GS-4046 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-1332m | GS-1332m |
| GS-1432m | GS-1432m |
| GS-1932m | GS-1932m |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-1056 | GTH-1056 |
| TZ-50/30 | TZ-50/30 |
| Z-51/30J | Z-51/30J |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-45/25 IC | Z-45/25 IC |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
