The Genie 1255782GT Hex Head Cap Screw, 1/2-13X2.0 is a genuine OEM fastener built for a wide range of Genie equipment, including S-series telescopic boom lifts, GS scissor lifts, and GTH telehandlers. As a direct OEM replacement, this screw is manufactured to the exact thread pitch, grade, and finish of the original — confirming a correct match to your machine's fastener specification. Cross-reference part number 1255782GT against your parts manual to verify it is the right fastener for your application before ordering.
Key Features
- Grade 8 Construction with ZAG Finish — Manufactured to Grade 8 strength with a zinc-alloy-plated finish, this screw delivers the dimensional conformity and corrosion resistance required for the original fastener position.
- Exact Thread Specification — Cut to a 1/2-13 thread pitch at 2.0 inches in length, this screw seats and torques to the same specification as the part it replaces, with no reworking of the mating hardware.
- Genuine OEM Part — Sourced directly from Genie, this fastener carries OEM traceability and is produced to the same tolerances as the hardware installed at the factory.
- Broad Compatibility Across Genie Equipment — Fits multiple Genie equipment families including S-series telescopic booms, GS scissor lifts in both DC and rough-terrain variants, GTH telehandlers, TZ trailer-mounted booms, and the ZX-135/70 articulating boom.
- Structural Integrity at the Joint — A fastener that is worn, cross-threaded, or incorrect for the position can compromise the security of the assembly it clamps. Using the correct OEM screw restores full clamping force and joint integrity.
A hex head cap screw is a threaded fastener used to clamp two or more components together at a defined torque, securing assemblies against movement, vibration, and load. The Grade 8 designation indicates the tensile strength class of the fastener, which must match the original specification — substituting a lower-grade screw into a position rated for Grade 8 can result in fastener failure under normal operating loads. The ZAG finish provides a layer of corrosion protection suited to outdoor equipment exposed to varying weather conditions. When replacing fasteners on aerial lifts and telehandlers, using the correct OEM part for the specified position keeps the assembly performing as designed.
Part Details
| Part Number | 1255782GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/2-13X2.0, 8, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-80 J | S-80 J |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-4655 | GS-4655 |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-4046 | GS-4046 |
| GTH-1056 | GTH-1056 |
| TZ-34/20 | TZ-34/20 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
