The Genie 824063GT is a genuine OEM Hex Head Cap Screw, 1/4-20 x 1.75 built for a wide range of Genie telescopic boom lifts, articulating boom lifts, scissor lifts, and telehandlers. Sourced directly through the Genie OEM supply chain, this fastener meets the exact dimensional and grade specifications called out in the Genie parts manual. It fits across the S and SX telescopic boom families, GS scissor lift models, Z and ZX articulating boom families, the TZ-50/30 trailer boom, and the GTH-1056 telehandler — verify part number 824063GT against your machine's parts manual to confirm it is the correct fastener for your application. A genuine OEM part ensures you are reinstalling the same grade, thread class, and finish that left the factory.
Key Features
- OEM Grade and Finish — Grade 8 fastener with a zinc-alloy dichromate (ZAG) coating, matching the corrosion resistance and mechanical strength of the original hardware.
- Exact Thread Specification — 1/4-20 thread and 1.75-inch grip length install directly into existing threaded locations without modification, keeping assembly straightforward and accurate.
- Broad Genie Fitment — Covers Genie S and SX telescopic booms, GS scissor lifts, Z and ZX articulating booms, the TZ-50/30, and the GTH-1056 telehandler. Cross-reference 824063GT against your parts manual before ordering.
- Structural Integrity — A correctly torqued, correctly graded fastener holds joints and panels secure under the load cycles and vibration common on aerial lift equipment. A stripped, corroded, or under-grade screw compromises that clamping force and can allow unwanted movement at the joint.
- Genuine OEM Sourcing — Supplied as a genuine Genie OEM part, so the grade marking, thread tolerance, and protective finish are verified to specification — not approximated.
A hex head cap screw is a threaded fastener tightened with a wrench or socket, used throughout machine assemblies to clamp panels, brackets, guards, and structural members securely together. The grade rating governs how much clamping force the fastener can develop and sustain — substituting a lower-grade screw in a joint engineered for a Grade 8 fastener reduces that clamping force and can lead to joint movement, fastener fatigue, or loosening under vibration. The zinc-alloy dichromate finish provides a layer of corrosion protection suited to outdoor equipment exposed to weather and wash-down. When a fastener is stripped, corroded through, or damaged during a repair, replacing it with the correct OEM specification part restores the joint to its original integrity.
Part Details
| Part Number | 824063GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/4-20 x 1.75, 8, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-135 XC | SX-135 XC |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-80 J | S-80 J |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-1932 | GS-1932 |
| GS-4046 | GS-4046 |
| GTH-1056 | GTH-1056 |
| TZ-50/30 | TZ-50/30 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
