The Genie 73928GT is a genuine OEM Hex Head Cap Screw, 1-8 x 11, Grade 5 built for Genie S-series telescopic boom lifts and Z-series articulating boom lifts. As a factory-original fastener, this screw meets the exact thread specification, length, and grade rating called out in the Genie parts manual, ensuring a correct fit in every application it was designed for. Cross-reference part number 73928GT against your machine's parts diagram before ordering to confirm this is the right screw for your specific model and installation point.
Key Features
- Exact Thread and Length Spec — The 1-8 thread pitch and 11-inch length are the identity of this fastener; no substitution with a nearby size will replicate the correct preload or engagement depth.
- Genuine OEM Quality — Sourced directly from Genie, this screw is produced to the same dimensional and material standards as the part that left the factory, with no deviation in head geometry or thread form.
- Direct-Fit Replacement — Installs without modification into the same threaded hole or joint as the original, maintaining proper torque spec and structural integrity at that location.
- Broad Boom Lift Coverage — Fits a wide range of Genie S-series telescopic booms and Z-series articulating booms, including models such as the S-60, S-65 TRAX, S-120, S-125, Z-60/34, Z-80/60, Z-135/70, and ZX-135/70, among others.
- Structural Fastener Integrity — Using the correct grade and size fastener at every joint on an aerial lift is a genuine safety consideration; an undersized or lower-grade substitute can compromise joint clamping and structural reliability at height.
A hex head cap screw is a fully threaded or partially threaded fastener with a six-sided head driven by a wrench, used to clamp two or more components together at a precise, controlled torque. On aerial boom lifts, structural fasteners like this screw are found at pivot points, cylinder mounts, boom section joints, and platform attachment points — locations where correct clamp load is critical to safe operation. A fastener that is the wrong grade, wrong length, or wrong thread pitch can stretch, strip, or fail to develop the required preload, which may allow movement or loosening at the joint over time. Replacing a worn or damaged screw with the correct Genie OEM part ensures the joint returns to its original specification.
Part Details
| Part Number | 73928GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1-8 x 11, Grade 5 |
Compatibility & Fitment
| Name | Models |
|---|---|
| S-40 | S-40 |
| S-60 | S-60 |
| S-60 HC | S-60 HC |
| S-65 | S-65 |
| S-65 TRAX | S-65 TRAX |
| S-100 | S-100 |
| S-105 | S-105 |
| S-120 | S-120 |
| S-125 | S-125 |
| Z-30/20 N | Z-30/20 N |
| Z-34 IC | Z-34 IC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/34 | Z-60/34 |
| Z-80/60 | Z-80/60 |
| Z-135/70 | Z-135/70 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
