The Genie 5224GT is a genuine OEM Hex Head Cap Screw, 3/8-16 x 2, built for a wide range of Genie equipment including GS scissor lifts, S and Z series boom lifts, GTH telehandlers, light towers, and manual material lifts. As an OEM part, this screw is manufactured to the same dimensional and material standards as the original fastener installed at the factory. Cross-reference part number 5224GT against your machine's parts manual to confirm it is the correct fastener for your application. With fitment spanning models such as the GS-1930, S-85, Z-45/25J Bi-Energy, and GTH-1056, this is a high-demand hardware item stocked to keep multiple Genie platforms running.
Key Features
- Exact Dimensional Match — The 3/8-16 x 2 spec means this screw installs directly without thread chasing or length adjustment, replacing the original fastener position for position.
- Broad Genie Fitment — Fits GS scissor lifts, S and Z series boom lifts, GTH telehandlers, TML light towers, QS stock pickers, GR and AWP personnel lifts, and Genie material lift lines.
- Structural Integrity — A correctly torqued, properly sized cap screw holds components securely under the dynamic loads and vibration common to aerial and lifting equipment. A stripped, wrong-length, or wrong-thread fastener compromises that connection.
- Hardware Stock Essential — Common fasteners in this thread size see regular replacement during routine service and inspection cycles; keeping the correct OEM part on hand avoids delays at critical points in the repair.
A hex head cap screw is a fully threaded or partially threaded fastener with a six-sided head driven by a wrench or socket. It secures components together by clamping force generated as the fastener is torqued to specification, and it relies on correct thread pitch, grip length, and material grade to hold that load safely. Using a fastener of the wrong length, thread pitch, or grade can result in inadequate clamping, thread stripping, or fastener failure — all of which compromise the integrity of the assembly it holds. Replacing a worn or damaged screw with the correct Genie OEM part restores the connection to its original specification.
Part Details
| Part Number | 5224GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 3/8-16 x 2 |
Compatibility & Fitment
| Name | Models |
|---|---|
| AWP | AWP |
| AWP Super | AWP Super |
| AWP Super Series | AWP Super Series |
| Genie Lift | Genie Lift |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GRC-12 | GRC-12 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2032 | GS-2032 |
| GS-2046 | GS-2046 |
| GS-2632 | GS-2632 |
| GS-2646 | GS-2646 |
| GS-3232 | GS-3232 |
| GS-3246 | GS-3246 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4047 | GS-4047 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-644 | GTH-644 |
| GTH-842 | GTH-842 |
| GTH-844 | GTH-844 |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| IWP Super Series | IWP Super Series |
| Load Lifter | Load Lifter |
| QS-20R | QS-20R |
| QS-20W | QS-20W |
| S-45 | S-45 |
| S-45 XC | S-45 XC |
| S-60 | S-60 |
| S-65 | S-65 |
| S-65 XC | S-65 XC |
| S-80 | S-80 |
| S-80X | S-80X |
| S-85 | S-85 |
| S-85 XC | S-85 XC |
| S-100HD | S-100HD |
| S-105 | S-105 |
| S-120HD | S-120HD |
| S-125 | S-125 |
| S-3200 | S-3200 |
| S-3800 | S-3800 |
| Super Tower | Super Tower |
| Superlift Advantage | Superlift Advantage |
| Superlift Contractor | Superlift Contractor |
| TML-4000N | TML-4000N |
| Z-30/20HD | Z-30/20HD |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/25 | Z-45/25 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-51/30J | Z-51/30J |
| Z-80/60 | Z-80/60 |
| Z-135/70 | Z-135/70 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
