The Genie 13000GT is a genuine OEM Hex Head Cap Screw, 5/16-18 x 1.25, built for Genie S and SX telescopic boom lifts, Z and ZX articulating boom lifts, and GTH telehandlers. As a genuine Genie part, this screw is manufactured to the exact thread spec and dimensional standard required by the original design. Cross-reference part number 13000GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- Genuine OEM Dimensional Conformity — Manufactured to the exact 5/16-18 thread pitch and 1.25-inch length called out in Genie's original design, ensuring a secure, properly torqued connection every time.
- Direct Hardware Replacement — This screw installs directly in place of the original fastener with no modification, matching the head-drive profile and thread engagement of the part it replaces.
- Broad Genie Fleet Compatibility — Fits a wide range of Genie S and SX telescopic booms, Z and ZX articulating booms, and GTH telehandlers, making it a practical stocking item for mixed Genie fleets.
- Fastener Integrity Where It Counts — A correctly sized and graded screw maintains the clamping load that holds assemblies together under operational stress. A stripped, undersized, or incorrect fastener can allow components to work loose over time.
A hex head cap screw is a threaded fastener used to clamp two or more components together, typically driven with a wrench or socket rather than a screwdriver. The 5/16-18 designation identifies the nominal diameter and thread pitch, while the 1.25-inch length sets the grip range for the joint. Using the correct OEM screw — with the right thread form, head geometry, and length — ensures the joint reaches its intended clamping force and stays secure through the vibration and load cycles that aerial equipment and telehandlers experience in daily use. A fastener that is too short, too long, or the wrong thread spec compromises the joint and can lead to component loosening or damage.
Part Details
| Part Number | 13000GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 5/16-18 x 1.25 |
Compatibility & Fitment
| Name | Models |
|---|---|
| GTH-644 | GTH-644 |
| GTH-842 | GTH-842 |
| GTH-844 | GTH-844 |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| S-45 XC | S-45 XC |
| S-60 | S-60 |
| S-60 J | S-60 J |
| S-65 | S-65 |
| S-65 XC | S-65 XC |
| S-80 J | S-80 J |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-125 XC | SX-125 XC |
| SX-135 XC | SX-135 XC |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
| Z-25/8 | Z-25/8 |
| Z-30/20HD | Z-30/20HD |
| Z-34 IC | Z-34 IC |
| Z-45/22 | Z-45/22 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/25 | Z-45/25 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-51/30J | Z-51/30J |
| Z-60/34 | Z-60/34 |
| Z-80/60 | Z-80/60 |
| Z-135/70 | Z-135/70 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
