The Genie 1257705GT is a genuine OEM Hex Head Cap Screw, M14-1.5X35, DIN961, Grade 10, built for Genie S-series telescopic boom lifts and Z-series articulating boom lifts. As a direct OEM replacement, this screw is manufactured to the same dimensional and material standards as the original hardware installed at the factory. Cross-reference part number 1257705GT against your machine's parts manual to confirm it is the correct fastener for your specific unit before ordering.
Key Features
- Grade 10 OEM Strength Rating — Manufactured to DIN961 Grade 10 specification, delivering the tensile strength the original design requires for this application.
- Exact Thread and Dimensional Match — M14-1.5 thread pitch and 35 mm length conform precisely to the OEM specification, allowing this screw to seat and torque correctly without modification.
- Broad S and Z Series Coverage — Fits a wide range of Genie telescopic and articulating boom lifts, including S-60, S-65, S-80, S-85, and Z-45/25 and Z-62/40 series variants and their XC, TRAX, HF, and HC derivatives.
- Structural Integrity Where It Counts — A fastener used on aerial boom equipment must hold its rated clamp load under vibration and load cycles. Replacing a worn or damaged screw with the correct OEM-grade hardware restores the joint to its intended clamping specification.
- Genuine Genie OEM Part — Sourced directly from Genie, ensuring this part meets the material grade and dimensional tolerances specified for these machines.
A hex head cap screw is a structural fastener that clamps two or more components together by developing a controlled clamping force when torqued to specification. On boom lift equipment, fasteners are subjected to continuous vibration, dynamic loading, and environmental exposure — conditions that can cause an undersized or incorrect-grade screw to lose clamp load, loosen, or fail. Using a screw of the correct thread pitch, length, and grade, such as this DIN961 Grade 10 unit, ensures the joint maintains its design strength throughout the service life of the fastener. A loose or failed fastener in a structural joint should be replaced promptly with the correct OEM component to restore the connection to specification.
Part Details
| Part Number | 1257705GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, M14-1.5X35, DIN961, 10 |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| Z-62/40 | Z-62/40 |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
