The Genie 1268274GT Hex Head Cap Screw, M16X60 is a genuine OEM fastener built for Genie S-series telescopic boom lifts and Z-series articulating boom lifts. Manufactured to DIN 933 standard in property class 10.9 with a ZAB finish, this screw meets the exact torque and tensile requirements specified for these machines. It fits a broad range of Genie booms including S-40, S-45, S-60, S-65, and S-80 J and XC variants, TRAX and HF models, and the Z-62/40. Cross-reference part number 1268274GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- Class 10.9 Tensile Strength — High-strength property class 10.9 rating delivers the clamping force and shear resistance required for structural fastening on Genie boom lifts.
- DIN 933 Standard Compliance — Fully threaded M16X60 hex head cap screw conforms to DIN 933 geometry, ensuring correct thread engagement and head seating without modification.
- ZAB Protective Finish — Factory-applied ZAB coating resists corrosion in outdoor and variable-weather jobsite conditions, extending the service life of the fastener.
- Broad Boom Lift Compatibility — Fits a wide range of Genie S-series telescopic and Z-series articulating boom lifts, including XC, TRAX, HF, and J variants, as well as the Z-62/40.
- Genuine OEM Part — Sourced directly from Genie, this screw is dimensionally identical to the original, so it installs to the same specification as the part it replaces.
- Structural Integrity Assurance — Using the correct OEM-grade fastener in critical joints helps maintain the structural integrity of the boom assembly and supports safe machine operation at height.
A hex head cap screw is a fully threaded fastener used to clamp and secure structural and mechanical joints throughout a machine. In boom lift applications, fasteners like this one are used in joints and assemblies where consistent clamping load is essential — an under-spec or incorrect replacement can allow movement, loosening, or component failure over time. The DIN 933 standard specifies the thread form, pitch, and head dimensions precisely, and the 10.9 property class indicates a high-strength fastener capable of handling significant tensile and shear loads. When a fastener in this role stretches, strips, or corrodes, it should be replaced promptly with the correct OEM part to restore the joint to its designed holding capacity.
Part Details
| Part Number | 1268274GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, M16X60, DIN933, 10.9, ZAB |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 XC | S-60 XC |
| S-65 XC | S-65 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| Z-62/40 | Z-62/40 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
