The Genie 1255469GT Hex Head Flange Screw is a genuine OEM fastener built for a wide range of Genie telescopic and articulating boom lifts, scissor lifts, and telehandlers. As a genuine OEM part, this screw is manufactured to Genie's exact dimensional and material specifications, ensuring it installs and seats correctly in every application for which it is listed. Cross-reference part number 1255469GT against your machine's parts manual to confirm it is the correct item for your unit before ordering.
Key Features
- Genuine OEM Dimensional Conformity — Produced to Genie's exact thread pitch (1/2-13), grip length (1.25"), grade 8 strength rating, and ZAG finish specification, so every fastener matches the original installation requirement.
- Direct Bolt-In Replacement — This screw replaces the original fastener without rework, retapping, or substitution, maintaining the structural integrity of the joint it secures.
- Broad Genie Equipment Compatibility — Fits Genie S and SX series telescopic boom lifts, Z and ZX series articulating boom lifts, GS series scissor lifts, and GTH series telehandlers, covering a wide cross-section of the Genie fleet.
- Grade 8 Strength for Demanding Applications — The grade 8 rating means this fastener is engineered to handle the clamping loads required in structural and mechanical joints on heavy aerial equipment — a worn, stripped, or incorrect-grade screw in these locations risks joint failure.
- ZAG Finish for Corrosion Resistance — The zinc-alloy/ZAG coating provides a protective surface layer that resists corrosion in the outdoor and all-weather environments where Genie equipment routinely operates.
A hex head flange screw combines a standard hex drive head with an integrated flanged bearing surface that distributes clamping load across a wider area, reducing the risk of surface damage and loosening under vibration. The flange acts as a built-in washer, maintaining consistent clamp force without requiring a separate washer component. When a fastener of this type is missing, incorrect, or has been replaced with an off-grade substitute, the joint it secures may work loose under the vibration and dynamic loads common to aerial lifts and telehandlers — making correct fastener specification critical to the structural integrity of the assembly.
Part Details
| Part Number | 1255469GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Flange Screw, 1/2-13x1.25, 8, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-80 J | S-80 J |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
