The Genie 826171GT Hex Head Flange Screw, 1/2-13x1.75 is a genuine OEM fastener built for a wide range of Genie equipment, including S and SX series telescopic boom lifts, Z and ZX series articulating boom lifts, GS series scissor lifts, and GTH series telehandlers. As a direct OEM replacement, this screw is manufactured to the same dimensional and material standards as the original hardware installed at the factory. Cross-reference part number 826171GT against your machine's parts manual to confirm it is the correct fastener for your specific unit and application. Keeping the correct replacement hardware on hand helps avoid unnecessary delays when scheduled maintenance or unexpected repairs arise.
Key Features
- OEM-Grade Fastener Material — Manufactured to Genie's dimensional and thread specifications for a 1/2-13 thread form at 1.75 inches in length, with a ZAG finish for corrosion resistance.
- Integrated Flange Design — The flange head distributes clamping load across a wider bearing surface, reducing the need for a separate washer and helping maintain joint integrity over repeated service cycles.
- Broad Equipment Compatibility — Fits Genie S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GS scissor lifts, and GTH telehandlers, covering a wide cross-section of Genie's aerial and telehandler lineup.
- Exact Thread Engagement — The 1/2-13 UNC thread spec matches OEM tapped holes directly, ensuring full thread engagement without rework or modification to mating components.
- Sourced from Genie — Supplied as a genuine OEM part, so thread form, shank diameter, head geometry, and finish all match the original specification for the listed machines.
A hex head flange screw combines a standard hex-drive head with a built-in flanged washer, allowing it to seat firmly against a surface and spread clamping force without a loose washer beneath it. This makes it a common choice in structural and mechanical assemblies where joint security and consistent torque retention matter. When a fastener of this type is missing, stripped, or corroded, the joint it secures can loosen under vibration and load, potentially allowing components to shift or separate. Replacing a worn or damaged screw with the correct OEM part restores the clamping force the joint was designed to carry.
Part Details
| Part Number | 826171GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Flange Screw, 1/2-13x1.75, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| SX-180 | SX-180 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-1056 | GTH-1056 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-62/40 | Z-62/40 |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45 XC | Z-45 XC |
| Z-45/25 IC | Z-45/25 IC |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
