The Genie 824095GT is a genuine OEM Hex Head Flange Screw, 3/8-16 x 3, 8, ZAG designed for a wide range of Genie equipment including GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, and GTH telehandlers. As a genuine OEM part, it is produced to the same specifications as the hardware installed at the factory, ensuring correct thread engagement and clamping load wherever it is used. Cross-reference part number 824095GT against your machine's parts manual to confirm it is the correct fastener for your application. Compatible models include the GS-1930, GS-1932, S-60, S-65, S-65 XC, S-80 J, SX-125 XC, Z-34/22 N, Z-45 XC, Z-62/40, ZX-135/70, Z-80/60, GTH-636, GTH-844, GTH-1056, GTH-1256, and additional models in these families.
Key Features
- Genuine OEM Dimensional Conformity — Produced to Genie's exact thread pitch, shank length, and flange geometry so the fastener seats and clamps correctly every time.
- Integrated Flange Head — The flange distributes clamping load over a broader bearing surface without a separate washer, simplifying installation and maintaining consistent torque retention.
- Broad Fitment Across Genie Families — Fits GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, and GTH telehandlers, making it a practical stocking fastener for mixed Genie fleets.
- Direct OEM Replacement — Matches the original hardware specification exactly, so no thread chasing, shimming, or adaptation is needed during installation.
A hex head flange screw combines the function of a standard hex head cap screw with a built-in load-spreading flange at the base of the head. The flange acts like an integrated washer, distributing clamping force across a wider surface area to reduce the risk of fastener pull-through or surface damage in structural and panel assemblies. When a fastener of this type loosens, stretches, or corrodes, the joint it secures can shift or separate, leading to misalignment or noise in the assembly it holds. Replacing a worn or damaged screw with the correct OEM part — matched to the original thread size and coating specification — restores the intended clamp load and keeps the assembly secure under the vibration and dynamic loads typical of aerial work platforms and telehandlers.
Part Details
| Part Number | 824095GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Flange Screw, 3/8-16 x 3, 8, ZAG |
Compatibility & Fitment
| Name | Models |
|---|---|
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| S-60 | S-60 |
| S-60 DC | S-60 DC |
| S-60 J | S-60 J |
| S-65 | S-65 |
| S-65 XC | S-65 XC |
| S-80 J | S-80 J |
| SX-125 XC | SX-125 XC |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-45 DC | Z-45 DC |
| Z-45 XC | Z-45 XC |
| Z-51/30J | Z-51/30J |
| Z-60 DC | Z-60 DC |
| Z-60/37 DC | Z-60/37 DC |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
