The Genie 824087GT is a genuine OEM Hex Head Flange Screw, 5/16-18 x 1.25, built for a wide range of Genie equipment including S and SX series telescopic boom lifts, Z and ZX series articulating boom lifts, GS series scissor lifts, and GTH series telehandlers. As a genuine OEM part, it is manufactured to the same standards as the hardware installed at the factory, ensuring dimensional conformity with the threaded interfaces and mating surfaces on your machine. Cross-reference part number 824087GT against your machine's parts manual to confirm it is the correct fastener for your specific application before ordering.
Key Features
- Genuine OEM Dimensional Conformity — Manufactured to exact thread pitch (5/16-18), length (1.25"), and grade specification, with a ZAG (zinc-plated) finish that meets OEM corrosion-resistance requirements for this fastener class.
- Integrated Flange Design — The hex head flange distributes clamping load across a wider bearing surface than a standard hex head, reducing the risk of loosening under vibration without requiring a separate washer.
- Broad OEM Fitment — Fits Genie S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GS series scissor lifts, GTH telehandlers, and select TZ series trailer-mounted booms — confirming its role as a common OEM fastener across the Genie line.
- Corrosion-Resistant Finish — The ZAG zinc coating guards against rust and surface degradation, helping the fastener maintain its clamping torque over time in outdoor and variable-weather jobsite conditions.
- Direct Hardware Replacement — Matches the original fastener specification exactly, so it threads into existing holes and seats against mating surfaces without alteration or shimming.
A hex head flange screw combines a standard hex-drive head with an integral flanged washer base, allowing it to bear against a surface and spread load without a loose washer. This makes it well suited to structural and panel fastening points on aerial equipment where vibration could work a conventional nut-and-washer assembly loose over time. A fastener that is the wrong thread pitch, length, or grade will either fail to engage correctly or will not hold adequate clamping force — both conditions that can allow joined components to shift or separate. Replacing a damaged or missing fastener with the correct OEM part restores the joint to its original specification and keeps the assembly secure.
Part Details
| Part Number | 824087GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Flange Screw, 5/16-18 x 1.25, 8, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-636 | GTH-636 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TZ-34/20 | TZ-34/20 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
